Warning, truck navcores 9.700/9.701/9.702 appear to be faulty!

Another error, but this possible in the map, just make you guys aware of it.

Arch bridge error on maps:
Arch bridges lowest heights are marked on TomTom maps.If a bridge has two marking, and you could pass under the middle of it, TomTom won't divert you through it.All arch bridges with two height markings has the lowest used in TomTom maps

[Login or Register to remove this advertisement]

In this example, the bridge is 3.2m on the side, and 4.4m on the middle.You have to give way to oncoming traffic, than you can move to the middle, and pass with a vehicle has less than 4.4m height.But TomTom won't take you there if you are 3.2m or higher.

kisede95 Reviewed by kisede95 on 7th June 2016. Warning, truck navcores 9.700/9.701/9.702 appear to be faulty! On many forums we are now starting to see reports (thanks Pesado & others) about errors with this navcore NOT routing according to your vehicle profile (under low bridges etc) which is very dangerous so either use it at your own risk or revert to the stable 8.398 truck navcore for now We hope/assume that TT will eventually get their act together and fix this with the next release (whenever THAT is) Rating: 5