Here's my current pre-patched 8.398 set attached to run the truck map on other devices

These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself.

Rapidshare (dlc) attached (use Jdownloader) see

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

[Login or Register to remove this advertisement]

Download your selected attachment from below, extract/unrar/unzip to get the .dlc file then copy to/use Jdownloader to download the actual dump folder from Rapidshare. Then just extract/unzip/unrar that downloaded Rapidshare.rar, copy the contents of the extracted folder to a 4Gb SD, MicroSD or SDHC card (minimum class 4 but preferably class 6 or higher) or direct to your internal memory on a 910/920/930/940/950, copy/add your ttgo.bif file from your backup or internal memory, add the LATEST VERSION v901 THAT WILL RUN ON THIS 8.398 Navcore Truck map folder from

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

. Then just crack the map using the latest version of FastActivate, TTusers Easytools, Bobbys TTool, BBS Tools, Alberts EasyActivator or other favourite tool from

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

to create a meta.dct AND a tmeta.dct in the map folder and away you go.

Only proven to work with x00, One's, One XL's incl One XL HD Traffic (NOT One XL IQ), x10, x20, x30, x40, x50's provided they have an SD/MicroSD card slot or 4GB internal memory like the 910/920/930/940/950.

Notes:

1. The version for the x20, x30, x40 is just a clean/full dump of an original navcore (not just the .cab) which is suitable for these devices.

2a. The version for the x50 has one quirk regarding shutdown which cannot be fixed (as it won't shutdown conventionally) but is got round by going through Change preferences/Battery saving preferences and untick Device stays on when external power is lost thus it will switch itself off 10 seconds after disconnecting your power lead.
Some report that pressing the power button down for 20-30 seconds also works but I've found this just puts it in sleep mode and therefore still drains the battery.
2b. To reduce/minimise the possibilty of rebooting/restarting, switch the unit on BEFORE connecting to your power source.

3. Specifically for the GO 700 you will need to remove the following to get this to fit on the 2.5Gb internal memory (because this was created for the non-mic 300 & 500 and therefore doesn't have the ASR folder)
3a. From the navcore:-
Vocaliser folder (no more computer voices), Helpme folder (no more straight to nearest doctor/dentist etc) and remove all but 04 & 05 (UK) voices from the voices folder.
3b. From the map itself:-
Cphoneme (used only for Loquendo & Vocaliser computer voices), Cspeech (no spoken address INPUT), crpoi (Compressed Rich Point Of Interest). No more "rich detail" (to see the "rich" detail select Navigate to ... Point of Interest ... POI near you ... select one of the built in categories ... select a POI ... If there is rich detail for that poi then a Details button appears under the phone number on the right of the screen. Click the Details button to see the the rich detail. This is often an address, web site url and email address but is technically capable of including any text and also pictures) and, if you need even more space, faces.dat & faces.met (no more polygons, lakes, forests, buildings - just roads and streets)

4. For all pre x20 models like the x00's, Ones & One XL's, x10's (510/710) but NOT the 910, (that were not designed to read SDHC's or have not previously seen/booted from an SDHC card) you first need to load a suitable bootloader (system file) to enable the device to actually boot up from your new 4Gb SDHC Truck card. The easiest way for you to do this is to copy/paste/overwrite the "system" file (extracted from the attached 5.5120 system file.rar) or from any of these downloaded dumps to your current standard SD card or internal memory and boot up once with that new system file THEN it will read your new SDHC card.

5. Specifically for the x10 series (like the x50's) to reduce/minimise the possibilty of rebooting/restarting, switch the unit on BEFORE connecting to your power source.

6. The x50 version is reported to also work on the XXL's but I've no way of proving this for sure either way.

7. And finally, if you only have 2Gb internal memory & no SD slot then your only option is to try

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

If you only need the official .cab (for x20/x30's) you can download it direct from

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

biggerdave Reviewed by biggerdave on 26th December 2011. SE 8.398 TRUCK NAVCORES for other devices CLOSED Here's my current pre-patched 8.398 set attached to run the truck map on other devices These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself. Rapidshare (dlc) attached (use Jdownloader) see How to use JDownloader/Cryptload dlc/ccf container files & linksave (http://www.metanmedia.net/tomtom-tutorials-faq/178725-how-use-jdownloader-cryptload-dlc-ccf-container-files-linksave.html) Download your Rating: 5

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

Why not try it & let us know