Manual created by m4gic of the forum elektroda.pl I have limited myself to copy the images and the translation of google.

Well gentlemen will show you how I did it pictorial Please, do not write with a small card soldier properly is because this is the "prototype" solution.

1. We start our TT copy memory on the hard drive

1. undress and then remove the motherboard. As we can see there is installed 1G NAND FLASH

2. supposed elimination

3. I put "cake" silicone to stick the memory card (stubborn somewhere you can install the micro-SD card reader, but you did not want

4. Paste the memory card and carry out the connection.

I wrote please do not criticize - this is a temporary solution, but the most important thing is to act !!!!

5. After connecting the card and we give our turn in the TT. If the card is cleaning the screen will appear with a cross indicating an empty memory.
It proposes a format before the operation to load previously copied the content of our navigation by the reader, since it takes less time.