Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

i said ; to get back the 3-piece bar if you got the 2-piece bar
it wont change vehicle options

strange indeed that only certain models are affected by this vehicle profile issue

basflt Reviewed by basflt on 29th April 2013. Truck 9.700/9.701/7.902 tips & tricks (more welcome here) If you DO want to use the 9.7** navcore (see other posts/reports about errors in this navcore) because you want to run the v910 or later Truck map (which will ONLY run on this navcore) then here are a couple of tweaks summarised below:- Problem 1: When entering Vehicle height you can't add the . "dot" or ' foot mark eg. if you want to add 14' 9" high, you can only enter 14' or 15' not between size. Solution: if you set height at 14' then tap done... it then goes to vehicle width, tap Rating: 5

Doh...and we were discussing how to get 3-piece bar when exactly?


Yeah, spooky it only appears to be the x40's

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

we were not discussing ....
read again title of topic
i was just adding to the , ahum , list ...
#8 if you missed

Same problems as in post #1 STILL persist in the latest 9.701 navcore!

Hello biggerdave, can i install this version of the truck on the Tomtom Start? thanks

The (Big Fat) Questions is : Which Start-Device ?? The First One with a 8.5??? NC have 64MB Ram and Works very well with 9.+++ NC....This Devices have IMHO 2 GB Memory whitout SD-Slot....if the NC Run

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

(is the best Idea to learn anything about NC , Devices etc. ) you need the Truck-Map-version for 2GB Devices

Good Luck and many Fun to play with- and test your TT

this tread is about TIPS ....

TIP of the day :
get yourself a second hand device that has an SD-slot
they are not expensive nowadays

i even found a good working XL at the garbage-dump last week