Hi All

[Login or Register to remove this advertisement]

I've been asked to look at a TT Go 300 by a mate, trouble is I know nothing about the way the devices with SD cards work !! as I've always sorted out 700's !! He has lost the SD card, so I'm trying to work out what should go on one. I have a formatted 2 Gb SD card that the TT actually recognises and starts to read from ... the screen then goes very dark and you can "just" see the words "tomtom" very faintly ... it does nowt else .... if you remove and replace the SD card the screen flashes brightly for 1/2 a second as you do each action.

Plugging into a computor it all works fine, connect to the system and you can read/write to the card no problem, screen stays bright throughout.

As I don't know what to put on I stuck 8.560 SE on. I can't activate any maps as because it won'rrt boot it doesn't write a tomtom.bif file to get the device number. I expected it tio boot, fail to find a map but write the .bif file ....

Is there anything "special" that needs to be done to the SD card/ navcore on a device that boots from an SD card ??

Little I can find about the go 300 on here as the words go, 300 are considered "too short" by the search engine !!

Many thanks for any advice

Entwood Reviewed by Entwood on 17th June 2013. go 300 - help needed please :( Hi All I've been asked to look at a TT Go 300 by a mate, trouble is I know nothing about the way the devices with SD cards work !! as I've always sorted out 700's !! He has lost the SD card, so I'm trying to work out what should go on one. I have a formatted 2 Gb SD card that the TT actually recognises and starts to read from ... the screen then goes very dark and you can "just" see the words "tomtom" very faintly ... it does nowt else .... if you remove and replace the SD card the screen Rating: 5