Results 1 to 7 of 7
Hybrid View
-
8th December 2016, 08:33 PM #1
Recording Waypoints (or angle post)
Important note:
If you notice that the GPS is “Searching the Sky” or has located less than 3 satellites, the GPS will not triangulate your location or record your point accurately.
1.While holding the GPS over the post, push the MARK Button.
(Tip: we recommend that you hold the GPS over the post for several seconds before touching the MARK Button which will give a more accurate position.)
2.Then select OK to save. The waypoint numbers will increment automatically each time you save a new waypoint.
Or if it is a special feature that you want to remember later on toggle to the icon name ie.001. Select the ‘Enter’ button and rename.journeyx Reviewed by journeyx on . Garmin GPS60 series Setup http://i.imgur.com/u6QfZTt.jpg Set GPS mode to normal There are several modes your GPS can run under: Normal, Battery Saver, GPS Off and Demo. It is important that you have the GPS set to "Normal" while mapping, as this setting updates your location most frequently, and your points will be more accurate than in Battery Saver mode. To set your GPS to normal mode: 1. Power on your GPS 2. Press MENU to get to the main menu screen (you may need to press MENU twice to quickly Rating: 5
TopoActive Europe 2024.10 FID 12522
I tried unlocking the Central Map for my eTrex...