Problems with the Europe_Truck map

**pe1agp** · 7th April 2019, 03:03 AM

Do I understand you now and do you want to use 2 Navcores on the same device?
As far as I know, dual boot is not possible.
The only solution in my opinion is to use two SDHC cards, one must have been created for Truck.
You can also opt for a normal passenger car with the Truck version.

pe1agp Reviewed by pe1agp on 7th April 2019. Problems with the Europe_Truck map I have a Tomtom Go950 (aplic. 9.702, SO 1114405, Ini 5.5279) and runs perfectly with Europe Truck 1020.9254 map in external micro SD. Now I download yours Europe_TRUCK_1025_9395 (https://filecrypt.cc/Container/6D05FCFAC0.html) map and install it. The problem is when I choose this map (Europe TRUCK forokeys in menu) the device reboot itself. One and one time. I try many options (reboot manually for me, take off other maps in micro sdcard, )and I can not resolve it. Never I dont manage start Rating: 5

**otin** · 7th April 2019, 03:39 AM

They don´t work in same time.:
- Navcore original 9.510 in internal memory in device only works when micro sd is put off. Then, the device starts from internal memory with 9.510.
I use it to drive my car.
- Navcore Truck 9.702 in external micro SD card, only work when micro sd is put in device. Then device starts from external micro SD with 9.702.
I use it to drive my motorhome or camping car.
Until now I change the start device only having the micro SD, in or out at device and restarting it, always without any problem. When de device restart in one concretly way and navcore, other one is as not existing.

**pe1agp** · 7th April 2019, 03:54 AM

Is it not more easy to select a normal car within the Truck version ?
It's just a few clicks to change from your motorhome to any other car.
Navcore 9.702 I thought set in the X40 mode give you an extra icon to change the vehicle quite easy

**otin** · 15th September 2019, 06:27 PM

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

My Navcore Truck haven`t telephone bluetooth, neither altimeter. The original navcore has both things.

**otin** · 15th September 2019, 06:20 PM

I tried to copy files to pc, and erase the sdcard. Then copy in sd card from beginning. When I did this, there was two files with 0 kb impossible to erase. Perhaps a cause of virus, I don`t know. I formatted the sd card, without any problem, I copied the files in, and then tomtom worked welll. The problem was in sd card.

**otin** · 15th September 2019, 07:03 PM

When I changed the map version 1035 instead the 1030 one, I has appeared the not desired restart problem again.
To delete pdis and heard warnings doesn`t give solution for the problem.
- New map 1035 works well erasing old file mapsettings, and begining from zero with this file.
- Old map 1030 works perfectly with old mapsettings file.
- New map 1035 doesn`t work with old file mapsettings extracted from 1030 map.
I always has copied the last file mapsettings.cfg to new map and I never has any problem. It is the first time.
I tried to begin well with 1030 map, and change to 1035. Then crash, it begins to restart y restart.
I don`t want to lose my favorites saved until now. Also, I prefer keep my configuration too, but if it is not possible, it is less serious, I put the configuration again. The worst thing is to put, again, all the warnings of the radars and the pdis, that there are many, but if there is no other remedy ...
My favorites list is more important.
Have you any solution occurs?

**pe1agp** · 15th September 2019, 07:17 PM

The use of the old mapsetting.cfg file is as follows.
Start TomTom Home
Connect your TomTom with your PC, connect with the PC if your TomTom asks for it.
Now go to operate my device or something similar.
Plan a short route and let a piece of the demo route run.
Stop the demo and return to the beginning, now your mapsetting.cfg is written in the correct format.

Good luck.

**pe1agp** · 15th September 2019, 07:49 PM

For those interested, a number of Navcore's for Truck can be found here

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

**Alfred_ML** · 17th September 2019, 02:52 PM

I have re-uploaded the archive of the TT Home Truck 9.702 extension in # 6

**pe1agp** · 27th February 2021, 10:47 PM

Try it here:

Link URL:

Only the registered members can see the Link URLs. Please Login OR Register.

[Login or Register to remove this advertisement]

Parts of site failed to load...
If you are using an ad blocker addon, you should to disable it (it blocks more than ads and causes parts of the site to not work).

Problems with the Europe_Truck map

Thread Tools

Search Thread

Display

Hybrid View

Advertisements

Suggested Articles:

Posting Permissions

First time update Motorrad V

Supermod