SE 9.702 TRUCK NAVCORES for other devices

I have a 910 so I will try mark cats version over the next couple of days and let you know how I get on.

Same here, I will be updating my 710 within the next few hours, will keep you all informed.

ok here goes, clean install, clear flash run 3 times bootloader is 55279 which came with the navcore.
Slower boot from cold maybe bootloader needs taking back to a lower version.
the ephem folder needs the packedephemeris .ee file for the 910 otherwise it struggles to gat a good fix (I copied it from the 910 7903 ephem folder
connect to pc after install still gives no warning about connecting to pc so it just has to be left to reboot by itself and then it connects preboot
inches has to be still put in by going back after first putting in feet.
bton and fmon have to be in the config setconfig text file otherwise cameras cannot be enabled.
I get between 19mb and 23mb free, but after doing the camera warning setup I disable Bluetooth and wireless just because I feel the unit runs better.

that's it for now but going on a trip tomorrow and will see how it performs.

Right, Got myself, a Go520, 530 and 710 model's for testing.

Tested as mentioned yurig's and patch and that works very well on GO710, BUT what i found which i sussed after numerous times was, when no external power was connected to the unit, it works flawlessly.
Now when connected to a power source either indoor or car charger and unit off, when pressing power button on unit, it would not boot straight away but take approx 15 seconds, then yellow bar goes across asthou unit been reset.
Then let it load, turn unit off and reboot again whilst power connected and it would run perfectly.
Seem's to be the first time always the external power is connected, then a simple let it load and turn it off and then back on would sort it.
I have been away a few day's so not sure as not read thread if any newer version's that could need testing as i now have some other model's to play with, kindly donated by family and friend's.
Best wishes

downgraded the bootloader to 55120 and removed the vocaliser folder and replaced it with loquendoTTS Kate and Simon voices, removed a lot of voices from the standard voices folder and only left English UK and now still getting 20mb free, little more testing and I will find somewhere to upload it, do I leave all the old voices so people from other language areas get theirs?.

Hi there,

I overwrote Navcore 9.702_DSA_GO from post #21 over original Navcore in my GO 750 with valid LIVE subscription.
Traffic sidebar gone...
I've got TMC Receiver. After connection to my unit, traffic bar is back.
Overall, w/o road test Navcore seems to be faster than 9.701.
Free RAM: 14.1 MB