A dummies guide to patching NAV3 using TTActivator

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

More like 10 weeks or maybe a bit longer as MSTMS are already working on this

After a disappointing experience with a 16GB card from Sandisk and a better result with an 8GB SD
card and partly due to a positive message that 32GB should also be able, I now have the 64GB but of
borrowed my GoPro Hero 2 and indeed with a surprising result.

I did use the Start 20 to format and format the SD card.
I encountered some problems with formatting and formatting via RLinkexplorer.

The procedure followed was first started with the Start 20 and only then the SD card was inserted.
Then in the card reader and provided with maps via RLinkexplorer.

It is, however, careful with such a Start 20, if you try to remove the SD card
it happens regularly that it jumps in all directions.

The following NAV3 maps have been tested by me in groups as shown below.
I think there is a maximum number of maps that you can put on an SD card.
Up to about 17 maps I still did well, although during the first test Europe_Zone_6_1050_10185
was last on the SD card it was not displayed on the screen of the Start 20.
The entire map was present when checked.

Depending on the map size, it would appear that 16 maps are displayed on the Start 20
the maximum number is, the number 17 placed Europe_Zone_6_1050_10185 did fit on the SD card but
was not visible afterwards.

Africa_1050_10188 - Australia_1050_10188 - Benelux_1050_10186
Brazil_1050_10188 - Canada-Alaska_1050_10187 - Central_and_Eastern_Europe_1050_10185
Central_Europe_1050_10185 - DE_AT_CH_1050_10186 - Eastern_Europe_1050_10185
Europe_1050_10185 - Europe_1050_10260 - Europe_1050_10262 Problem with map
Europe_Zone_1_1050_10185 - Europe_Zone_2_1050_10185 - Europe_Zone_3_1050_10185
Europe_Zone_4_1050_10185 - Europe_Zone_5_1050_10185
==========================================================================================================
Europe_Zone_6_1050_10185 - Europe_Zone_7_1050_10185 - Europe_Zone_8_1050_10185
France_1050_10186 - Greece_1050_10186 - Iberia_1050_10186
Italia_1050_10186 - New_Zealand_1050_10188 - Poland_1050_10186
Scandinavia_1050_10186 - South_Africa_Swaziland_and_Lesotho_1050_10188 - Southeast_Asia_1050_10188
Taiwan_1050_10188 - Turkey_1050_10186
==========================================================================================================
United_Kingdom_and_Republic_of_Ireland_1050_10186 - US_East_South_Central_1050_10187
US_Midwest_1050_10187 - US_North_West_1050_10187 - US_Northeast_1050_10187
US_South_Atlantic_1050_10187 - US_South_West_1050_10187 - US_West_South_Central_1050_10187
USA_Canada_1050_10187 - USA_Canada_and_Mexico_1050_10187 - Western_Europe_1_1050_10185
Western_Europe_1050_10185 - Western_Europe_2_1050_10185 - Western_Europe_3_1050_10185
==========================================================================================================
Europe_Zone_1_1050_10260 Europe_Zone_1_1050_10262
Europe_Zone_2_1050_10260 Europe_Zone_2_1050_10262
Europe_Zone_3_1050_10260 Europe_Zone_3_1050_10262
Europe_Zone_4_1050_10260 Europe_Zone_4_1050_10262
Europe_Zone_5_1050_10260 Europe_Zone_5_1050_10262
Europe_Zone_6_1050_10260 Europe_Zone_6_1050_10262
Europe_Zone_7_1050_10260 Europe_Zone_7_1050_10262
Europe_Zone_8_1050_10260 Europe_Zone_8_1050_10262


P.S.
Although I can see that in the meta.txt of TTactivator the series 10206 and 10262 are present, they do not work on the Start 20 for for example Benelux 1050 -10260

P.P.S
The error messages most probably caused me to let the meta.txt update run too late

Thanks pe1agp, in the start model any map can be installed without problem if it has meta code.
Since you say the 1050_10260 maps are not in the TTActivator meta.txt, you should use the "Upload_meta" tool to update your meta.txt in the Start20 and add the latest codes.

In any case, the 1050_10260 maps are specific to Via, because this Via model manages voice orders differently, however in Start20 it does not matter because it is a model that does not have asr.

Where we have to be careful is when installing maps to "Via" models, only sayville or non-asr are useful, with the latter the asr option of the Via device is lost.

I have been trying to run the truck on Via and I have seen that it is not possible.

Only "camper sayville" works correctly on Via 130/135 devices.

@Orni
Although I had updated the meta, those maps are not working. (Now they do very well)
I then in TTactivator went back to the NAV2 options.
There the action started to update the meta.txt.
I then went looking for that meta.txt file and indeed found the entire series 10260 and 10262.


However, a quick test with Benelux 1050 10260 gave the same incorrect result. (This one not tested yet, but it must be the same like all other maps)
As you certainly rightly point out that these are for a special device, I assume that should be the problem ?