A dummies guide to patching NAV3 using TTActivator

bonjour,
j'ai beau essayer plusieurs fois et toujours le même problème ! j'ai aussi désactivé Kaspersky

Hello,
no matter how many times I try and always the same problem ! I also deactivated Kaspersky

lecoq Reviewed by lecoq on 5th June 2020. A dummies guide to patching NAV3 using TTActivator A dummies guide to patching NAV3 using TTActivator This guide will walk you through patching and managing your NAV3 device using TTActivator. A big thanks to MSTMS team and everyone else involved for making all of this possible. Requirements: TTActivator (https://www.gpsurl.com/tomtom-open-tools-and-tweaks/247170-ttactivator-windows-macos-linux.html) R-Link Explorer (https://www.gpsurl.com/tomtom-nav3/249346-link-explorer-download.html) (if you have a SD card in your NAV3) Rating: 5

Hello everyone.




thanks also for this great program.
I was able to renew the tomtom via 110 to the last cards.
So thanks again to the creators of this program.




Kind regards, Cees from the Netherlands.

If you already have the patch on your device, all you have to do is update the meta.txt and install the new map.

Putting the patch is only necessary the first time to insert the navcore patch and the activation tool into the device, these two are included in the initial patch MSTMS or MSTMS_Truck that you can install with TTActivator or manually.

All this, of course, if you do not use any cleaning tool or update your gps with the My Drive Connect application.

Hoi,Allereerst bedankt voor de goede software, ik heb maar 1 probleem, ik krijg geen landen op mijn sd-kaart, ik moet de kaart eerst in de tomtom formatteren en dan de landen erop zetten via een kaartlezer, je kunt het uitleggen als dummy hoe deze procedure werkt.

Hi,

First of all thanks for the good software, I only have 1 problem, I don't get countries on my sd card, I have to format the card in the tomtom first and then put the countries on it via a card reader, you can explain as a dummy how this procedure works , step-by-step,.

Quote:

Only the registered members can see the QUOTE Contents. Please Login OR Register.

Sorry I don't speak Dutch (maybe someone else can help), but if you want to install a map into SD card, see the section called "Installing maps into SD Card:". You need to use TTActivator to download the map to a folder, and then use R-Link Explorer to transfer the map onto the SD card.

If you are asking how to format the SD card, the easiest way would be format the SD card as FAT32 and insert into the NAV3 to let it do the "setup". You might have issues if the SD card is larger than 16GB.