A dummies guide to patching NAV3 using TTActivator

Indicate which map you are trying to activate for example:

Europe_TRUCK 1065_10718

Indicate which meta code you are using for example:

AC 02 2C 37 2B D2 75 1D 83 05 32 65 24 BF 3B D7 Europe_TRUCK-102863.meta; Europe_TRUCK 1065_10718
8F 33 9C 68 A4 4E 99 9F 42 21 B3 59 9E 5C 68 DB Europe_TRUCK-102863.tmeta; Europe_TRUCK 1065_10718

1. Install the Europe_TRUCK 1065_10718 map on your gps or your card
2. Make sure you have a ttgo file of your gps in the root next to the map, if you don't have it copy one from a previous copy of that device.
3. Put the codes inside the meta.txt file of the TTActivator folder.
   Code:

   Only the registered members can see the CODE Contents. Please Login OR Register.

4. Connect your gps or card to the pc.
5. Start TTActivator.
6. Select your gps in the device window.
7. In the installed content tab click on refresh.
8. See that TTActivator shows the map without activating.
9. Press the activate button of TTActivate.

Your map should be activated, if it is not, repeat the process step by step

What is your tomtom model?

To your Start you cannot put a nav2 map like Europe_TRUCK 1065_10718

I recommend you not to use truck maps in Start25, it is not stable.
Check the post;

• Link URL:

  Only the registered members can see the Link URLs. Please Login OR Register.

• Link URL:

  Only the registered members can see the Link URLs. Please Login OR Register.

• Link URL:

  Only the registered members can see the Link URLs. Please Login OR Register.

Install dark green maps at your start, check which ones have the meta code and proceed as explained to install the previous map but with one suitable for your device, remember only dark green
maps.




The 1060 maps work on your device because they all have a meta code, the same is not the case with 1065.