clearflash.exe

What device are you referring to if I may ask, please.
Without any further information, it becomes difficult to help or make suggestions

pe1agp Reviewed by pe1agp on 27th May 2020. clearflash.exe If you are having one of the problems below, it could be that there are too many (or corrupt) files in the flash memory on your device so download and install this tool to clear the flash: •You have start-up or freezing issues. •Your device runs slow or sluggish. •You are unable to activate the map on your TomTom device even though you have a valid product code. •You have to enter the passkey every time you connect your TomTom device with your mobile phone. •Your settings are not saved Rating: 5

thank you very much it worked perfectly

Thanks. Navmans seem even more defective, I have some that won't boot or in reboot loops - they say non-volatile ram is the problem. I have discovered a modern USB-3 adapter pumping out up to 3 amps breathed life into many GPS's. I presume the battery or a capacitor on board has high internal resistance, breaking the boot cycle, but the extra current allows it to recover. Saved a few TT's that way.There are many fake 2amp adapters that barely deliver one, so don't believe ratings.

I believe that with more current you cannot and will not solve that increased resistance, the only correct way
would be to increase the voltage to resist that increased resistance, only then a little more current will flow.


In addition, it must be taken into account in order not to overload the battery too much, the charging current may be a
maximum of 10% of the battery capacity during the next 14 hours, these are the normal standard usual values.

would this clearflash work on a tomtom go 50?

Is this also available for Mac?

As far as I know, no.