Results 141 to 150 of 150
Hybrid View
-
17th July 2019, 07:30 PM #1
Better to say it's GREAT.
I've been from Capelle aan den IJssel to Hoek van Holland, no problem at all
The had been switched off for at least two hours and with the ignition on found direct several satellites.
The ephem is still complete empty.
I would like that 9.501 #metoo, oh sorry wrong hashtag
P.S.
@BMWdriver
Despite I've add a folder 9500c to your 9.500c
Now I've found one extra folder 9500 with as contentbin \
lib \
sbin \
The Rider v2 must have added it itself.
All folders contain files.
Have I discovered something new?pe1agp Reviewed by pe1agp on . New Navcores v9.541 & 9.501 released for many NAV2 devices Release notes (https://uk.support.tomtom.com/app/release_notes/type/navkit) VERSION 9.541 Released on 19 December 2018 This update applies to: XXL Classic, ONE IQ Routes, XL IQ Routes, XL IQR2 / XL Classic, GO 750, GO 750 LIVE, GO 950, GO 950 LIVE, GO 540 LIVE, GO 740 LIVE, GO 940 LIVE, GO 530, GO 630, GO 730, GO 930, GO 720, GO 520, GO 920, EASE, ONE 140, Start Maintenance release. Rating: 5Last edited by pe1agp; 17th July 2019 at 07:39 PM.
-
The Following 1 Users Say Thank You to pe1agp For This Useful Post:
- [ Click To Expand ]
-
BMWdriver (17th July 2019)
-
17th July 2019, 10:52 PM #2
Thats right. ttsystem contains a lot of files. A few of them are really needed, because its construction is made for different GPS chips (Sirf + GL1 + GL2 + Atheos). Most of them will be deleted in ramdisk during booting. Others that are really needed will be exported to this new created (if not exist) folder on sdcard to save RAM. So every different TT will create this folder with different content.Last edited by BMWdriver; 17th July 2019 at 11:06 PM.
-
17th July 2019, 11:17 PM #3
I'm using that map already from the beginning, never a problem even with all these speedcams
-
18th July 2019, 02:32 AM #4
Test with 9.501 from BMW driver.
The Navcore as available as it is available through Mega for replacement at the Europe 1030 9519
At the first start, the Rider v2 resets itself and then starts up normally, unfortunately no satellite reception this time in my radio room.
Then outside in the garden that faces south, also here no satellite reception.
Did a hard reset myself and see at the start, which incidentally took some time, 6 satellites were received immediately.
Turn off the Rider v2 by hand for about 30 seconds.
Unfortunately, after the new start, no satellite reception again, but there are 2 perceptible but in gray and they do not count.
Again a hard reset and all 6 satellites are back, in fact I can walk through the house with it and go to my radio room and the satellites stay on screen.
Now I see 5 pieces and 2 pieces in gray
This is more or less the same behavior as the old 9,500, not the old 9,500c
P.S.
I just connected the Rider v2 to the PC.
Then SiRFStarIII.cmd activated.
At the first, 8 satellites start within a few seconds.
The Rider v2 turned off by hand for about 30 seconds
At the next start, the last one all in my radio room, the 8 satellites are displayed very briefly, after which they all turn gray for a short time and then disappear again just as quickly and instead I see 1 active satellite appearing within 10 seconds supplemented to the number of 8 as before.
In one word, grandiose.
So there are 4, but we don't pay attention to thatLast edited by pe1agp; 28th July 2019 at 06:53 PM.
-
The Following 2 Users Say Thank You to pe1agp For This Useful Post:
- [ Click To Expand ]
-
-
28th July 2019, 06:35 PM #5
please help me, i have a tomtom one v3
SE Navcore 9101.516023 fixdate
date is good, suicide.dat is also on it
do I need ito.dat ?? or the ephem folder ??
SE Navcore 9101.516023 fixdate
date is good, suicide.dat is also on it
everything works fine except ito.dat after reset it is gone
my setconfig.text is:
Current Emulation: x40 light
Changed Menu
BT: 1
TTS: off
Run in Save RAM Mode
changedtext:TomTom ONE
usesetting
noqfixdel
btoff
fmoff
ttsoff
if I give the tomtom a hard reset
then he changes setconfig.text to:
Current Emulation: x40 light
Changed Menu
BT: 1
TTS: off
Run in Save RAM Mode
changedtext:TomTom ONE
btoff
fmoff
ttsoff
this text is away
noqfixdel, usesetting
and I use noqfixdel, so he doesn't delete the ito.dat
but if he always adjusts the setconfig then it doesn't work
Please help me
thanksLast edited by vulliw; 29th July 2019 at 11:04 AM.
-
29th July 2019, 02:16 PM #6
Now I've read your problem at least 4 times on different forums and different threads.
I'll give you one answer, try 9.510 for 32 mb devices
-
30th July 2019, 12:31 PM #7
where can I download it?
also has this fix date?
-
30th July 2019, 12:47 PM #8
-
1st January 2021, 07:51 PM #9
What is working Navcore for TomTom One XL?
-
2nd January 2021, 02:24 AM #10
In my One XL I have 9.541.3145439.2 32mb version with 1060 map
Boot 5.5120 and I put 4gb SDHC but you MUST FORMAT NORMAL, NOT QUICK FORMAT, or will not work.
First time update Motorrad V
Can the PC see the device in Explorer USB...