Results 41 to 50 of 62
-
7th June 2020, 05:13 PM #41
You must put more data, the problem with the USB port, charging but MyDrive connect does NOT recognize it? when you connect tomtom to PC you hear "ding dong", in network connections in addition to your Ethernet, TomTom Ethernet should appear.
regards
-
The Following 1 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
Alfred_ML (12th June 2020)
-
7th June 2020, 05:39 PM #42
The USB of the GPS was repaired with a cable tinned directly on the printed circuit board, it is charging, but the data circuits have peeled off, so the PC cannot detect it. I hope I'm well understood, because I used Google Translate.
-
7th June 2020, 08:21 PM #43
yes I understand, with that repair it loads, but it has no data line for PC to see it,
therefore, having no data connection tomtom internal memory which is where the navcore is installed, PC cannot be patched,
in the SD there are only the maps you can put, not the navcore.
I am sorry to tell you that in that situation even if you install maps in SD, they will not work for you because you cannot patch navcore.
regards
-
The Following 2 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
Alfred_ML (12th June 2020), biggerdave (7th June 2020)
-
7th June 2020, 11:41 PM #44
Or would I have to repair the data circuit ...
-
8th June 2020, 03:45 AM #45
is to see if it has the microusb, it is only those 3 data pins, giving continuity to the tracks or usb cable, it depends where it is broken.
if you have a microusb it is to look for contiunity to the tracks, insulated copper wire (hair thickness)
If you do not have a microusb connector and you do not want to put a new solder, just as it has positive and negative, it dates them to the tracks, in this way you must always carry the cable
regardsLast edited by simba; 8th June 2020 at 08:52 PM. Reason: colors usb cable
-
The Following 3 Users Say Thank You to simba For This Useful Post:
- [ Click To Expand ]
-
Alfred_ML (12th June 2020), asturcon57 (10th June 2020), biggerdave (8th June 2020)
-
10th June 2020, 11:02 AM #46
-
10th June 2020, 01:25 PM #47
What device do you have? What is your navcore?
-
10th June 2020, 01:49 PM #48
Administrator
SPAM HUNTER/KILLER
Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/left
S i m p l e s
-
12th June 2020, 06:55 PM #49
Hi, I have a problem, I have a tomtom Via 135, I have navcore 12.075.3065980.84, on this system I want to put a Truck card on it, I used the patch of the Truck with the relevant cards on it, everything works and starts nicely but if I want to select an address to Amsterdam (see Photo), for example, it will lock and after a while it will restart.
-
12th June 2020, 08:47 PM #50
TomTom Master
Supporter
Photo not seen.
Repeat the card process again with R-link Explorer. Put the Truck map on the card.
Register To ReplyAdvertisements
Suggested Articles:
Staff Online
General map discussions here (NO...
According to Status of NAV4/5/6 v1130 maps/metas...