Results 321 to 330 of 641
-
8th May 2019, 02:37 AM #321
i try after 7 days down again
-
8th May 2019, 02:40 AM #322
-
8th May 2019, 01:36 PM #323
That should eliminate all problems on the affected Go x20/30/7000:
- create a suicide.dat with entry "5" (without the execution characters), put it to the root of device or SD (if NC is on SD)
- start the Go x20/30/7000 (satellite detection not required)
- remove the power (if connected) and turn off the Go again. Either via the automatic switch-off function or by hand, in any case switch off only after removing a connected power supply!
- wait at least the 5 seconds set in suicide.dat
- turn on the Go x20/30/7000 again (it starts after a correct switch off with 00.00) and he will find the satellites (about one minute later then also the correct time). Whether with or without GpsFix files! In the worst case, wait 3-5 minutes.
Now the Go x20/30/7000 should always after these 5 seconds find the satellites (without any GpsFix).Last edited by Alfred_ML; 24th May 2019 at 12:00 AM.
-
The Following 5 Users Say Thank You to Alfred_ML For This Useful Post:
- [ Click To Expand ]
-
jrjordao (26th June 2019), Momatz (8th May 2019), Nando Rola (22nd May 2019), pe1agp (10th May 2019), yopy (25th May 2019)
-
8th May 2019, 02:01 PM #324
-
8th May 2019, 04:27 PM #325
Hi all:
I tell you my little contribution on the subject:
I have carried out the tests as it says to the companion Alfred_ML in a device One of chip GL1, changing the values that comments in the file ee_meta.txt 1924909261 (Tue, 31 Dec 2030 01:01:01 GMT) and the result of the hour , it is always the same: 0.00
I have made many more changes even I have placed the values of the year 2101: 4133984461 Sat, 01 Jan 2101 01:01:01 GMT and also continues with the same problem of the time: 0.00.
I think we should study this gltt file, in case my help is useful, since I have accessed several of those files, and although they all have the same weight, of 877 KBs, the internal content between them is quite different.
As for the hexadecimal lines, comment that I do not dominate any of it, but I think, that there must be the problem. Let's see if between all we can find the solution.
Comment also that I have done different tests with DSA navcores generated by me, and the result always and with all, has been the same.
For any questions or help, you have me HERE
Translated with the help of google translator
regards
-
The Following 1 Users Say Thank You to beraun For This Useful Post:
- [ Click To Expand ]
-
Nando Rola (22nd May 2019)
-
8th May 2019, 07:19 PM #326
-
The Following 1 Users Say Thank You to goodje For This Useful Post:
- [ Click To Expand ]
-
Nando Rola (22nd May 2019)
-
8th May 2019, 10:00 PM #327
I never have suggest this for a device with GL1. My description is only for a Gox20/30/7000 (Sirf Star III)...But the better way for Go x20/30/7000 is listed in #323
There isn't any solution for GL1 at the moment.Last edited by Alfred_ML; 8th May 2019 at 10:05 PM.
-
The Following 2 Users Say Thank You to Alfred_ML For This Useful Post:
- [ Click To Expand ]
-
Momatz (8th May 2019), Nando Rola (22nd May 2019)
-
9th May 2019, 03:33 AM #328
Indeed, the option TTquickgpsfix was designed (by whom ???), to establish a connection to a smartphone (in Bluetooth modem) to access the internet and update the position of satellites. The "TTquickgpsfix-wrapper" file tries to connect via the Bluetooth console to download the "Ephemeris.cab" file on the TomTom server, then uncompress the archive and copy the update files to the ephem folder:
-
The Following 1 Users Say Thank You to Charlie62 For This Useful Post:
- [ Click To Expand ]
-
Nando Rola (26th May 2019)
-
9th May 2019, 12:50 PM #329
Which 2007 phone had internet? And which Go x20/30/7000 has a BT-hardware/protocol to support this with a modern smartphone?
Last edited by Alfred_ML; 9th May 2019 at 12:53 PM.
-
The Following 1 Users Say Thank You to Alfred_ML For This Useful Post:
- [ Click To Expand ]
-
pe1agp (9th May 2019)
-
9th May 2019, 02:01 PM #330
For SirfStar III device (e.g. x20 or x30) try this.
I extracted the files clmapp and sirfreset from navcore 9.541. Try to put this file in /bin foder and, if you have an SE navcore, in /Outsourced.xxxx/bin folder.
It's an attempt. I can't try this because i don't have x20 or x30 device.Last edited by ruggio81; 9th May 2019 at 02:05 PM.
Mazda NB1 (JUST discussions here)....
(sorry, doubled...)