Results 1 to 6 of 6
Threaded View
-
22nd October 2019, 04:47 PM #1
PSA_ovip-int-firmware-version_21-08-22-32_NAC-r1_NAC_EUR_WAVE2
YOUR TOUCHSCREEN NAVIGATION SYSTEM UPDATE
Step 1 : Prepare your USB stick
Make sure you have an empty USB stick with a minimum 32GB capacity that is formatted to FAT32. (Some updates may only need a 16GB USB stick capacity)
Reset your USB stick before you download any update.
Step 2 : Licence download
1. Create a "Licence" folder within your USB stick.
2. Download your licence.
3. Copy the licence into the "Licence" folder within your USB stick.
Download Software (2.5GB)
Step 4 : Extract the file and copy it to your USB stick.
Step 5 : Plug your USB stick into the USB port within your vehicle
In order to go through the in car steps, please download the PDF below. You can then choose to send it to your smartphone or print it.
Important information:
- You need to have your engine running throughout all of the updates.
- It is advised to avoid driving during the updates.
- Deactivate the "Stop & Start" function in order to avoid standby mode, especially if you're not driving.
- Never remove the USB stick from its port before the end of the update process.
imlost Reviewed by imlost on . PSA_ovip-int-firmware-version_21-08-22-32_NAC-r1_NAC_EUR_WAVE2 YOUR TOUCHSCREEN NAVIGATION SYSTEM UPDATE Step 1 : Prepare your USB stick Make sure you have an empty USB stick with a minimum 32GB capacity that is formatted to FAT32. (Some updates may only need a 16GB USB stick capacity) Reset your USB stick before you download any update. Step 2 : Licence download 1. Create a "Licence" folder within your USB stick. Rating: 5
-
The Following 2 Users Say Thank You to imlost For This Useful Post:
- [ Click To Expand ]
-
maxbullett (30th October 2019), nona krimit (23rd January 2020)
Medianav Evolution voices
Sarcasm? Or what is your last sentence supposed...