Results 1 to 10 of 19
Threaded View
-
3rd February 2018, 10:12 PM #1
WIP Nav+ [RT6] Europe maps - 2018-1 [ WIP Nav+,RT6, Smeg, Smeg+, Smeg+IV2 ]
NEWEST MAPS 2018-1
Extract all files from compressed archive to empty FAT 32 formatted 8GB USB flash drive, go to maps update and select desired region.
Engine must running during this procedure.
Before installing Check System software Version:
IMPORTANT
Follow the procedure below to determine the software version of the navigation system, in particular models 208 and 2008 through 2015:
• Press and hold (for 5 seconds) the "SRC" key on the left touch screen.
• Select: System version. View the version of the displayed software and use the compatible update in accordance with the following versions: -
• For version 3.x or 4.x: Europe - Version 2017-2 Touch screen 7 "(SMEG) (Ref: 16 198 492 80 or T1000-25138).
• For a 5x version: Europe - Version 2018-1 Touch screen 7 "SMEG + iv1 (Ref: 16 267 409 80 or T1000-25737).
• For a 6x version: Europe - Version 2018-1 Touch screen with MirrorScreen SMEG 7 "+ iv2 (Ref: 16 267 411 80 or T1000-25740).
If device ask for license, use licence generator tool
Link:
- First enter your VIN number
- Next add your CCT.DAT.inf file from root files in your new map for your car (remember to use the right CCT.DAT.inf file)
- Then click "Generate", and you have your personal "Activation code" (to enter on Navigation screen, when install your new maps)
installation instructions :
Manual for SMEG
navigation
navigate to
settings
Cards
Update with a lock or round arrows
Update system firmware: Leave software in folder. root \ smeg ...
Update alert zones: Only place software on usb stick. folder and file in root of stick
Update card: Only place software on usb stick. folders and files in root of stick
PW : PeugeotUpdate
Uploaded
Link to the maps:
Mega:
Link to the maps:dckers Reviewed by dckers on . WIP Nav+ [RT6] Europe maps - 2018-1 [ WIP Nav+,RT6, Smeg, Smeg+, Smeg+IV2 ] NEWEST MAPS 2018-1 Extract all files from compressed archive to empty FAT 32 formatted 8GB USB flash drive, go to maps update and select desired region. Engine must running during this procedure. Before installing Check System software Version: IMPORTANT Follow the procedure below to determine the software version of the navigation system, in particular models 208 and 2008 through 2015: • Press and hold (for 5 seconds) the "SRC" key on the left touch screen. Rating: 5
-
The Following 4 Users Say Thank You to dckers For This Useful Post:
- [ Click To Expand ]
-
Audi RMC Navigation Maps 2024...
perfect instructions, everything works for me ......