Recording a Waypoint (Angle Post)

1. While holding the GPS over the post, press the Mark button.
2. Press ENTER on ‘Done’. The waypoint numbers will increment automatically each time you save a new waypoint.
3. Or if it is a special feature that you want to remember later on toggle to the icon name ie.001. Press the ENTER button and rename.
4. The waypoint is now recorded and you may proceed to the next angle in the fence line where you will repeat this process again.
If you notice that the bars showing the GPS accuracy have a red cross through them the GPS will not record your point accurately.
The ‘red cross’ means it could not lock onto any satellites. The easiest way to correct this is to turn the unit off then restart the unit once you are out in the field.
Your GPS Set-up is complete!