Results 11 to 20 of 24
Hybrid View
-
28th June 2018, 09:57 AM #1
I can't say for sure whether this software works for sure or not anymore. I tried installing Garmin XT onto my Magellan device and tried this software but am coming up short when I run the program again with the new sw.unl file generated (you can't run the internal gps without the correct unlock code and recognition by the program). I made sure there is no extra spaces or other characters in the UNL file. Do capitals matter in the file name? I have attached a photo of my file directory but I don't think it will make a difference. The device ID is 1701273933 but every unlock code is a different generation. Trying to grab a card ID is also kind of hard. I have tried putting the SD card's serial number from my Garmin DriveSmart 50 and pulling up the Data Card Test Page but upon doing so, it screws up the directory and I have to reformat the card, install new version etc. (even then with the new code it doesn't work) To sum up possible conclusions to my problem that haven't worked:
1. The program cannot recognize the unl file (most likely)
2. The program is not reading the correct unl file
3. The unl file is not in the right directory (unlikely)
4. There are two exes to run: 'Que.exe' (found in /Apps/WM/) and 'Garmin.exe' (found in /GMXT) and I'm not using the correct one.
5. The Garmin folder is named 'Garmin XT' and not 'Garmin'
6. The program is being a jackass...
[IMG][/IMG]
Note: This is a Magellan RoadMate 5220 running jailbroken on MioPocket 4.0 r63 and Garmin XT is 5.0.0.20wp. Again Device ID is 1701273933 (the one found in the 'About' section in the program.DXOS3 Reviewed by DXOS3 on . JetMouse Garmin Keygen v1.5 with Checksum Fix JetMouse Garmin Keygen v1.5 with Checksum Fix Requirements: Runs on PC only. Overview: There is a checksum bug in JetMouse Garmin Keygen (a.k.a. Garmin Unlock Generator) versions 1.3, 1.4 and 1.5 which generate invalid unlock codes for some map IDs such as 2040 to 2047. This release fixes the bug by a binary patch to v1.5. Enjoy! UnLock Map or Mapsource 1. Put your DeviceID ( In Garmin Tools/Settings/About or some similar) 2. Select <custom mapset> 3. Put MapID 4. Generate Rating: 5
-
The Following 2 Users Say Thank You to DXOS3 For This Useful Post:
- [ Click To Expand ]
-
-
11th July 2018, 06:40 AM #2
That's correct that every unlock code is generated differently. Regardless of whether you've made the sw.unl code correctly, you don't have a detail map in the directory and the program won't work properly without one. You have a basemap and there is also an UNL file for a detail map named GMAPSUPP. You should remove the GMAPSUPP.UNL file and just add a suitable GMAPSUPP.IMG or GMAPPROM.IMG unlocked with any version of gimunlock.exe. The image you posted doesn't show any detail map present.
If it doesn't recognize the sw.unl file my recollection is that the program will still run but in trial mode. It's unclear from your description wheter you've been able to get it to run at all though. Que.exe is certainly what starts the main program.
-
4th July 2018, 08:46 PM #3
-
The Following 3 Users Say Thank You to gordologo For This Useful Post:
- [ Click To Expand ]
-
-
30th May 2019, 10:05 PM #4
I have several copies of Keygen, but cannot get any of them to install on Windows 10 PC. I have tried compatibility checks without success. Any advice please?
-
30th May 2019, 11:06 PM #5
Last edited by Garmin_Nuvi; 20th May 2024 at 05:17 AM. Reason: Upload JM-KG to host
-
The Following 15 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-=SPECIALIST=- (15th April 2022), bnc1 (14th December 2020), Brother52 (6th October 2022), Bumsi (19th June 2019), coromonadalix (15th April 2024), DavidFlet (1st June 2019), Desto (20th May 2024), dijabolik012 (22nd July 2023), Garmin_Nuvi (20th May 2024), gsx002 (12th April 2024), mdanilo (19th April 2024), oxili (24th December 2023), radi8tor (8th July 2019), riolovelidas (8th November 2023), thewalker (25th January 2020)
-
31st May 2019, 07:08 PM #6
Thank you for the response. The link is not working so I .
Is this a windows programm eto install?
-
The Following 1 Users Say Thank You to DavidFlet For This Useful Post:
- [ Click To Expand ]
-
riolovelidas (8th November 2023)
-
14th May 2020, 02:45 PM #7
Thanks and I got it.
-
The Following 1 Users Say Thank You to GPS4Fan For This Useful Post:
- [ Click To Expand ]
-
riolovelidas (8th November 2023)
-
31st May 2019, 08:06 PM #8
To run the file just double click (if necessary run as admin) on one of the jetmouse 1.5 copies you have, since this is a keygen you may get a virus warning (false positive) from malwarebytes or similar program...........at your risk, depending on where you got the files from....Last edited by floydo; 31st May 2019 at 08:30 PM.
-
The Following 2 Users Say Thank You to floydo For This Useful Post:
- [ Click To Expand ]
-
DavidFlet (1st June 2019), riolovelidas (8th November 2023)
-
25th January 2020, 07:32 PM #9
What floydo says is right. On Win10, you may need to disable the built-in Windows Defender antivirus or add the JM Keygen to the exceptions list.
Obviously, you would run any potentially "suspect" apps on an isolated pc for security reasons.
-
The Following 1 Users Say Thank You to thewalker For This Useful Post:
- [ Click To Expand ]
-
riolovelidas (8th November 2023)
-
7th November 2023, 10:23 PM #10
If I open the Garmin unlock generator I can type only 4 characters as FID. Am I need to type the fifth character as PID? Or what is the solution?
I use Garmin Unlock Generator 1.5 about 15 years ago.
Thank you!
-
The Following 1 Users Say Thank You to Lordus For This Useful Post:
- [ Click To Expand ]
-
riolovelidas (8th November 2023)
Similar Threads
-
JetMouse Garmin Keygen v1.5 with Checksum Fix
By Mobile_Guru in forum Garmin Open Tools & TweaksReplies: 9Last Post: 6th May 2024, 05:41 AM -
[GUIDE] Installing a Garmin GSD 24 with Transducer Adapter Box
By journeyx in forum Garmin TutorialsReplies: 5Last Post: 8th December 2016, 10:52 PM -
NEW-Tom Tom Europe + Turkey + v1.20 unofficial with Speedcams [Europe 955.6746]
By garaveli in forum TomTom iPhoneReplies: 0Last Post: 26th August 2015, 02:10 AM -
Tomtom v1.3 ANDROID with speedcams alerts activation
By esquiro in forum TomTom POI's and SpeedcamsReplies: 0Last Post: 15th February 2014, 04:24 PM -
Garmin Unlock Generator v1.5 Final
By HULK in forum Garmin's Software & ToolsReplies: 0Last Post: 18th November 2011, 11:08 PM
Blowfish/Meta codes for v1130...
41 23 02 54 52 28 16 56 77 3C 7A 05 0E AB 0D 26...