Results 1,081 to 1,090 of 1993
-
14th October 2020, 07:49 PM #1081
-
14th October 2020, 08:36 PM #1082
The last question. All was ok after install the new firmware and i could open the .jnx. Today the DriveTrack 71 was charging and I unlocked It, but there was a small click and the screen turned off. Now there is no way that it turns on. I think that this problem isn't related with the update (yesterday and part of today it worked correctly) and it's caused by any hw failure (smells like burnt). What do you think?
-
15th October 2020, 03:21 AM #1083
Unfortunately this does sound like a hardware related problem especially with the tell tale smell. Very disappointing for you, In my experience it is worth a call to Garmin(not mentioning anything about Patching)to see if they can help, often if you have a positive approach, the customer service person can get a supervisor to authorise a "good will" replacement even if the device is out of warranty. Mention your hunting club and how many Garmin devices you & your friends have. Good luckLast edited by Garmin_Nuvi; 16th October 2020 at 03:22 AM.
-
19th October 2020, 07:34 PM #1084
Last edited by Garmin_Nuvi; 21st October 2020 at 03:13 AM. Reason: Combined posts
-
19th October 2020, 10:07 PM #1085
@
This is a Patched Firmware (JNX + Unlocked Maps) for GPSMAP276cx ver. 5.10
Since the GPSMAP276cx (HWID: 2479) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Give feedback!
-
The Following 4 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
21st October 2020, 11:34 AM #1086
My friend owns Garmin Echomap Plus 62cv. I tried Garmin BlueChart® g2 Vision® HD - VEU716L - Central Mediterranean map from SD and it works, but only for a short period of time:Short English translation:Map cannot be authenticated therefore it will be disabled after 17. dec. 2020. You can find more info in the user manual.I believe that the reason for this is protected software but not sure if it's even possible to patch it, since I cannot connect device with PC and grab gcd file. All updates works via Active Captain app..Is there any solution for this?
Moderator Note
Try searching this thread using the name of the device!
Last edited by Garmin_Nuvi; 4th November 2020 at 04:59 AM.
-
30th October 2020, 12:02 AM #1087
@
This is a Patched Firmware (JNX + Unlocked Maps) for Garmin Alpha 100 ver. 7.80
Since the Garmin Alpha 100 (HWID: 1562) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Give feedback!
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
30th October 2020, 02:49 AM #1088
-
3rd November 2020, 04:36 PM #1089
hi
I would like to patch an ECHOMAP UHD 92 SV, but the very last version of the software of this GPS is 14.20
I guess the given patch is not suitable?
if so, is it possible to patch software version 14.20?
thank you
-
4th November 2020, 04:24 AM #1090
EchoMAP plus & UHD v1330-1420 Patch
Garmin:
as of October 20, 2020
Credit:JohnSilverXVILast edited by Garmin_Nuvi; 4th November 2020 at 05:49 AM.
-
The Following 2 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
Please help me with my tomtom one...
As Jungblume2005 suggests, install navcore 9.510...