Results 1 to 10 of 1991
Hybrid View
-
1st October 2020, 04:02 AM #1
The SD card kit is just a simple method to install the Patched .gcd
Does your SD card have a new file named 154.bin on it after using the SD card kit ?
Added the patched .gcd file only ,if you want to try the method suggests, I 'm sure he will help you with installation.
Garmin_Nuvi Reviewed by Garmin_Nuvi on . Universal Firmware Patcher for Protected Garmin Devices Universal Firmware Patcher for Protected Garmin Devices v.1.10 This is an universal firmware patcher for protected Garmin devices. Many devices recently have a strong firmware protection and cannot use unlocked maps because firmware requires .gma and has MSV ( Map Signature Verification). In this list (http://www78.zippyshare.com/v/CWAOqHso/file.html) you will be able to check if your device firmware requires this patcher or if it just needs gingunlock+mapsigpatch or simply an .unl file Rating: 5Last edited by Garmin_Nuvi; 1st October 2020 at 06:29 AM.
-
1st October 2020, 02:41 PM #2bu4xj5ppmdGuest
Ok
Yes, and I keep a copy in a safe place as it is recomended. I can confirm that the firmware is successfully installed because the version of the firmware changes (I have installed both version 6.2 and 6.3)
I have tried it using these 2 methods (with no result):
Can you explain this in greater detail?Last edited by Garmin_Nuvi; 1st October 2020 at 03:19 PM.
1st October 2020, 11:21 PM
#3
Last edited by Garmin_Nuvi; 2nd October 2020 at 03:43 AM.
2nd October 2020, 02:57 AM
#4
Download the attached file and the patched.rgn from Garmin_Nuvi and put the rgn and updater.exe in the same folder. put the drive track 71 in preboot mode {pres and hold the screen at the top left corner {(see the foto) the drive track 71 mast be closed not in standby)}
Last edited by Garmin_Nuvi; 2nd October 2020 at 03:29 AM.
2nd October 2020, 02:32 PM
#5
bu4xj5ppmd
Guest
I tried updater.exe method and it finally worked!!!
For this device (Drive track 71) to enter pre boot mode the GPS must be power off. Then connect usb cable and press and hold the upper left corner of the screen.
Thank you everyone for your support
World/Europe Speedcams from SCDB
iGO SCDB Speedcams Europe_World_Truck 30.05.2024...