Results 1,051 to 1,060 of 1995
-
28th September 2020, 10:52 PM #1051
I see two part numbers reported for Alpha 200i above:
006-B3433-00 and 006-B3510-00.
Which is correct?
-
29th September 2020, 02:59 AM #1052
DriveSmart 61, DriveTrack 71 006-B2588-00 Release 6.30
(41928 Kb)
DriveTrack 71 fw 6.30+JNX.rar SD card Kit FWID 2588 ONLY
DriveSmart 61 fw 6.30.rar SD card Kit FWID 2588 ONLY
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed, so keep a copy of it somewhere safe.
Back up your existing JNX files first, then copy back after patching.
-
The Following 1 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
XisiX (30th September 2020)
-
29th September 2020, 03:39 AM #1053
-
29th September 2020, 04:33 AM #1054
-
29th September 2020, 06:46 AM #1055
Inevitable.
They have been doing that for a quite a while now.
On the latest devices since DriveSmart 65 HWID 2586 was launched, the only way to get the GUPDATE is from a device or a clone of it, having it doesn't help as they are encrypted.Last edited by Garmin_Nuvi; 29th September 2020 at 06:57 AM.
-
29th September 2020, 10:02 PM #1056bu4xj5ppmdGuest
I just installed "DriveTrack 71 fw 6.30+JNX.rar SD card Kit FWID 2588 ONLY" and same problem, the device only shows the pre-installed jnx maps.
I have tried to copy the JNX maps in both the internal memory and in the SD card with the same result.
Before installing the patch I removed all existing JNX files.
Any idea? thanks
30th September 2020, 12:00 PM
#1057
Notre Dame.rar
I don't have a DriveTrack to test on ,but I Patched the Firmware and uploaded it again.
What JNX files are you trying to use.
Try this Birdseye JNX
Attachment 2730
Last edited by Garmin_Nuvi; 30th September 2020 at 12:22 PM.
30th September 2020, 02:50 PM
#1058
bu4xj5ppmd
Guest
The same I use for Garmin Astro 320.
Unfortunately it didn't work either
Stupid question: is it necessary to install the GCD firmware patch after applying the SD card KIT?
Thank you for your support
Last edited by bu4xj5ppmd; 30th September 2020 at 04:26 PM.
Garmin TopoActive South America...
Hello, does anyone know if the TopoActive South...