Results 691 to 700 of 1995
-
5th November 2019, 06:08 PM #691
SD Package with Patched Firmware for GPSMAP 276cx available at
Updating is very simple:
1) Extract GCD File from Archive
2) USB connect Device to PC
3) Run WebUpdater (be sure to have an active Internet connection, WebUpdate requires it)
4) Drag&Drop patched GCD File over WebUdater window
5) Firmware flashing start
6) After Device reboot you have New Patched Firmware on board
-
5th November 2019, 11:45 PM #692
Thank you so very much FireFox 58. Very-very helpful.....After extracting the file from Post #607, I renamed it to GUPDATE.GCD and placed the file in the root directory of the internal drive of the 276cx and on the Garmin folder of the internal drive [I did not know if it would work and what directory the file should have been placed.... so I placed it on both directories.....]. Turned the 276cx off and on again, it recognized the file and it updated the firmware to the new patched one....An alternate way to using the webupdater. On another note, just to share the experience, there are instructions on various web sites how to patch the official firmware utilizing some executable files available in the web......The key word was "available" I was able to find the official firmware after a couple of hours looking around, I found a number of sites claiming that I could download the executable files for the patch but the files were not available in any of them. All lead to various advertisements etc etc. Thank you once again for all the help and the patched file. Mario
-
6th November 2019, 08:20 PM #693
Would it be possible to provide a SD file for a GPSMAP 64sx?
<PartNumber>006-B3431-00</PartNumber>
<SoftwareVersion>220</SoftwareVersion>
<Description>GPSMAP 64sx</Description>
Thank you!
-
7th November 2019, 12:36 AM #694
This is a Patched Firmware (JNX + Unlocked Maps) for GPSMAP64sx ver. 2.20
Since the GPSMAP64sx (HWID: 3431) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Give feedback!
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
7th November 2019, 03:58 AM #695
-
7th November 2019, 01:59 PM #696
Hi. Can anyone help me add a Garmin GPSMAP 60Cx estonia language file to .RGN file? Original Gpsmap 60sx firmware (no estonia language).it is Gpsmap 60Csx firmware there is estonia language.
Last edited by arvik67; 8th November 2019 at 10:10 PM.
-
7th November 2019, 07:26 PM #697
Garmin Drive 50
Hi everyone. I have Garmin Drive 50 LM, Software version 5.90, GPS Firmware 5.10.07, HWID 2267.
There are installed Maps of UK and Ireland, but I want install whole Europe 2020.20.
As I understood, i should install patched firmware in order to install unlocked maps.
If anyone could assist I will be so grateful
Any links, tutorials anad assistance is more than welcome
Thank you in advance
-
7th November 2019, 07:37 PM #698
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
Everyone8 (9th November 2019)
-
11th November 2019, 02:15 AM #699
how to get system folder to cover old gupdate.gcd file for garmin drivevesmart 51?
This is an English speaking forum:-
how to get system folder to cover old gupdate.gcd file for garmin drivevesmart 51?Last edited by biggerdave; 11th November 2019 at 02:50 AM. Reason: Translated to ENGLISH!
-
12th November 2019, 04:36 AM #700
здравейте.
Имам желание да купя от познат на нищожна цена nuvi 2545 lm и се интересувам дали е необходима процедура за пачване, която трябва да бъде използвана, за да запазим картите, за да ги оставим? Хиляди препоръчителни благодарности!
Last edited by rumenkalev; 12th November 2019 at 04:55 AM.
General current/recent map & meta...
Thanks Biggerdave. RunMeForCode is very...