Results 341 to 350 of 1995
-
17th March 2019, 11:50 PM #341
I would like to mention a problem that arose by upgrading my device GPSMAP276cx with the GPSMAP276cx_ (2479) _430_JNXPatched
The device can not read new .gpi files!
I can import files gpi and with POILoader, and by copying - pasting to the POI folder.
Files I send via POILoader are sent normally.
Before disconnecting the GPSMAP276cx from the computer all .gpi are properly displayed in the BaseCamp and POI folder.
But when I turn on the GPSMAP276cx, the Garmin logo appears on the screen for a few seconds, then the device turns off!
This is happening repeatably over and over again.
If I connect the GPSMAP276cx via USB to my computer and delete the new .gpi files from the POI folder, then the GPSMAP276cx immediately turns on and works perfectly!
With the .gpi files that existed on the GPSMAP276cx before upgrading with the GPSMAP276cx_ (2479) _430_JNXPatched there is no problem !!!
The problem arises with the new .gpi if I put them into device memory or microSD. Then patched firmware!
Does anyone have any idea about the problem I am describing and any solution to suggest?
I would highly appreciate any help provided!
Thank you very much in advance .
-
18th March 2019, 04:07 PM #342
@
This is a custom SD flash kit only for HWID 2803 devices (Drive & DriveSmart 51 APAC), firmware version 3.10
Instructions: see
Drive and DriveSmart 51 APAC (2803) fw3.10.rar
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
Sphinx (29th March 2019)
-
18th March 2019, 04:15 PM #343
@
The problem with bad .GPI file is well known, it freezes Devices.
Surely the .gpi file contains some errors, try perhaps to recompile it whith my software
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
dimbait (18th March 2019)
-
18th March 2019, 06:55 PM #344
-
18th March 2019, 10:00 PM #345
Hello everyone
I own a Montana 680
it is impossible to read the last unlocked maps (Topo Italia v5, Topo Sweden v5, ...)
I can not do the manipulations because I do not have a PC, only a Mac
would it be possible to help me create the patch for this GPS?
is it necessary to update 3.30 to 3.40 before or after the patch?
thank you very much to the time consecrated
software version 3.30
id 006-B2299-00
Model Garmin Montana 680Last edited by toox; 18th March 2019 at 10:05 PM.
-
18th March 2019, 11:44 PM #346
@
Earlier in this discussion (Post #280) you can find the last patched firmware for your device.
To install it you need only WebUpdater, available for Mac too
Don't ask me anything about the Mac, I'd burn it from the most flammable part
-
19th March 2019, 05:13 AM #347
.............................................................................................
Last edited by Akyta; 13th April 2019 at 11:43 AM.
-
21st March 2019, 01:01 PM #348
@
This is a custom SD flash kit only for HWID 2435 devices (Zumo 3x5), firmware version 4.60
ChangeLog:
Instructions: see , excluded firmware downgrade not necessary at all.
Zumo 3x5 (2435) fw4.60.rar
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
GPS_NAV (21st March 2019)
-
21st March 2019, 02:22 PM #349
Big Thanks FireFox58!
I will give it a go. Do I just follow instructions in post#105?
-
22nd March 2019, 04:16 PM #350
thank you very much FireFox58 for your help
I downloaded the patch but I admit that I do not understand how to update the GPS!
I am looking for the solution on the subjects
Thank you also Akyta is very nice, I will not fail to ask you if I have a question
have a good day guys
City Navigator Middle East and...
I responded to your first post ...