Results 1 to 10 of 2029
-
3rd December 2015, 02:15 PM #1
Universal Firmware Patcher for Protected Garmin Devices
Universal Firmware Patcher for Protected Garmin Devices v.1.10
This is an universal firmware patcher for protected Garmin devices.
Many devices recently have a strong firmware protection and cannot use unlocked maps because firmware requires .gma and has MSV ( Map Signature Verification).
you will be able to check if your device firmware requires this patcher or if it just needs gingunlock+mapsigpatch or simply an .unl file or old gimgunlock.
- Remove any gupdate.gcd in your device.
- Set device to Mass Storage.
- Download the patcher:
- Download firmware gupdate.gcd Copy it in the patcher directory Note: be sure to get your device HWID firmware, check it in garmindevice.xml
- Open Patcher and drop the gupdate.gcd in patcher window. The patcher will provide the patched gupdate.gcd in your chosen directory.
- Drop your patched gupdate.gcd in RGNTool and save it as .rgn.
- Drag the .rgn in Updater.exe icon, Updater.exe will open, tick USB
- Now plug your device to your pc and device will start and immediately, as Garmin logo appears press upper left corner to get preboot mode and make Updater.exe to see your device, at that point click OK (still holding upper left corner untill the flashing process is finished and Updater will show "Success!") Safely unplug device from pc.
- Clear Non Vol. ( ) or ( )
or
You are done, your device is unprotected, now you can use every kind of unlocked maps (NTU too).
NOTE: to flash a firmware update in the future, just patch the new gupdate.gcd and flash it normally with Webupdater (drag&drop the file in Webupdater shortcut on desktop) or copy gupdate.gcd in the sd or in .System.
Remember to remove any previous gupdate.gcd in your device, before flashing any updates.
All Credit big-bangPiEtU Reviewed by PiEtU on . Universal Firmware Patcher for Protected Garmin Devices Universal Firmware Patcher for Protected Garmin Devices v.1.10 This is an universal firmware patcher for protected Garmin devices. Many devices recently have a strong firmware protection and cannot use unlocked maps because firmware requires .gma and has MSV ( Map Signature Verification). In this list (http://www78.zippyshare.com/v/CWAOqHso/file.html) you will be able to check if your device firmware requires this patcher or if it just needs gingunlock+mapsigpatch or simply an .unl file Rating: 5Last edited by PiEtU; 30th May 2021 at 06:08 PM.
-
The Following 38 Users Say Thank You to PiEtU For This Useful Post:
- [ Click To Expand ]
-
-=SPECIALIST=- (15th April 2022), andreapl (18th August 2019), atomantmk (5th February 2022), barzov123 (31st October 2019), Davide Starc (26th September 2017), deirosjuan (3rd May 2020), Dell (17th June 2017), dimbait (10th March 2019), docstephano (29th May 2020), dudikov (13th February 2020), EI6461 (28th August 2020), escorpion (12th December 2018), fipspm (26th September 2020), foxie (29th September 2020), Gesha (1st May 2023), gsm-help (7th June 2019), isa.ahmed (15th October 2020), jf2604 (7th December 2021), juping (18th August 2021), khandarees (15th March 2019), leogoto (8th May 2022), lis1 (5th October 2019),
maghero(23rd March 2017), mazari (14th April 2021), Miner (13th April 2022), NaMi (26th March 2023), oxili (5th December 2015), Pkunchev (22nd December 2021), posledniy (3rd February 2024), RTuERkaM (15th November 2018), samsong (8th August 2017), sbihue (23rd August 2018), seal777 (2nd August 2020), sergioalberto (14th November 2019), Skatroski (4th April 2022), smartfresh (13th April 2021), thomaslakis (14th December 2023), tomojure (2nd June 2018)
-
1st July 2016, 01:03 AM #2
Hi, i need a valid link to download "Universal Firmware Patcher for Protected Garmin Devices", thank you in advanced for any help!
-
The Following 1 Users Say Thank You to gigel696 For This Useful Post:
- [ Click To Expand ]
-
docstephano (29th May 2020)
-
9th September 2016, 05:21 PM #3
-
The Following 1 Users Say Thank You to haribo34 For This Useful Post:
- [ Click To Expand ]
-
docstephano (5th March 2020)
-
23rd March 2017, 02:02 AM #4
-
27th October 2017, 01:28 AM #5
Universal Firmware Patcher for Protected Garmin Devices
This is an universal firmware patcher for protected Garmin devices.
Many devices recently have a strong firmware protection and cannot use unlocked maps because firmware requires .gma and has MSV ( Map Signature Verification).
you will be able to check if your device firmware requires this patcher or if it just needs gingunlock+mapsigpatch or simply an .unl file or old gimgunlock.
1.Remove any gupdate.gcd in your device.
2.Set device to Mass Storage.
3.Download the patcher.
4.Download firmware gupdate.gcd Copy it in the patcher directory Note: be sure to get your device HWID firmware,
check it in garmindevice.xml
5.Open Patcher and drop the gupdate.gcd in patcher window. The patcher will provide the patched gupdate.gcd in your chosen directory.
6.Drop your patched gupdate.gcd in RGNTool and save it as .rgn.
7.Drag the .rgn in Updater.exe icon, Updater.exe will open, tick USB
8.Now plug your device to your pc and device will start and immediately, as Garmin logo appears press upper left corner to get preboot mode and make Updater.exe to see your device, at that point click OK (still holding upper left corner untill the flashing process is finished and Updater will show "Success!") Safely unplug device from pc.updater
You are done, your device is unprotected, now you can use every kind of unlocked maps (NTU too).
NOTE: to flash a firmware update in the future, just patch the new gupdate.gcd and flash it normally with Webupdater (drag&drop the file in Webupdater shortcut on desktop) or copy gupdate.gcd in the sd or in .System.
Remember to remove any previous gupdate.gcd in your device, before flashing any updates.
or i can do it just write HWID FIRMWARE and the name of the appliance
-
The Following 31 Users Say Thank You to vladan091 For This Useful Post:
- [ Click To Expand ]
-
adrianm (29th August 2018), Antonio19 (6th January 2019), barzov123 (20th April 2019), CrackUK (12th November 2019), danielb (7th December 2018), daniowikary (4th October 2018), darkleech (29th June 2018), daytona (18th March 2019), Elhoj (10th July 2019), eltr (15th January 2019), floydo (25th October 2018), fullequipe (16th September 2018), Gonzakpo (10th August 2018), ivanbl (8th July 2019), JackC (5th April 2018), khandarees (15th February 2018), Lchhung (24th August 2018), Luzbel (28th May 2018), Mick Fox (6th January 2020), miggue (25th March 2019), PIRINEU1956 (20th December 2019), posledniy (2nd December 2018), R@me$h (27th October 2017), raimisv (25th January 2019), RingoTB (4th September 2019), seal777 (2nd August 2020), shalesy (18th March 2019), smileysxt (15th February 2019), tomojure (19th January 2019), underliquid (16th August 2019), zeskier (24th May 2019)
-
27th October 2017, 02:02 AM #6
-
27th October 2017, 02:31 AM #7
in large quantities.Who is not sure I'll make a patch.
give me HWID FIRMWARE and the name of the appliance
-
The Following 3 Users Say Thank You to vladan091 For This Useful Post:
- [ Click To Expand ]
-
-
27th October 2017, 03:19 AM #8
Show Hidden Files windows. Click the “Organize” button on Windows Explorer’s toolbar and select “Folder and search options” to open it
Click the “View” tab at the top of the Folder Options window. Select “Show hidden files, folders, and drives” under Hidden files and folders. Click “OK” to save the new setting.
View Protected Operating System Files on Windows 7, 8, and 10 First, open the Folder Options window. On Windows 8 and 10, click the “Options” button on the View toolbar. On Windows 7, click Organize > Folder and search options.
Click the “View” tab. Uncheck the “Hide protected operating system files (Recommended)” box
.
.Newer nuviji 2xx5 series, 3xxx, zumo 350 is near the top of the case need to set the MTP to Mass Storage to show hidden folders .System: 1. Going into Developer menu, first go to the "cockpit"
2. You are holding your finger on the middle of the screen approx. seconds to open a page with diagnostics
3.Going down one page in the menu
4.You choose MTP Settings
5.choose "Mass Storage" and shraniš.
When connecting to a PC .System folder will be displayed and settings will be valid until the first reset.
After each reset the device it is necessary to repeat the procedure.
Thanks to the user-yea, that these images originally published
-
27th October 2017, 03:33 AM #9
Pre-Boot mode
1. Power OFF your Nuvi.
2. Press and keep holding the most left upper corner of the LCD screen
3. Power ON your Nuvi but DON NOT release your finger from LCD screen (keep left upper corner of the LCD screen procedure ends)
4. You will notice Nuvi boots in Pre-Boot mode. Now quickly connect your USB cable.
it's better to ask for pach and make it for you
-
The Following 1 Users Say Thank You to vladan091 For This Useful Post:
- [ Click To Expand ]
-
adrianm (29th August 2018)
-
27th October 2017, 01:20 PM #10
For forum members, can make a patch.
give me HWID FIRMWARE and the name of the appliance.
patch arrives ready with Instruction.
-
The Following 5 Users Say Thank You to vladan091 For This Useful Post:
- [ Click To Expand ]
-
adrianm (29th August 2018), jf2604 (24th July 2020), juanchogps (21st September 2023), R@me$h (27th October 2017), theresaway (30th October 2020)
World/Europe Speedcams from SCDB
But this is a new invention of thieves. To steal,...