Results 901 to 910 of 1996
-
3rd May 2020, 01:47 AM #901
Can help me to activate this firmware to use unlocked maps . thanks
-<Model>
<PartNumber>006-B1697-00</PartNumber>
<SoftwareVersion>450</SoftwareVersion>
<Description>nüvi 55</Description>Last edited by Garmin_Nuvi; 3rd May 2020 at 03:27 AM. Reason: Remove device ID etc
-
3rd May 2020, 03:28 AM #902
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card into device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.Last edited by Garmin_Nuvi; 1st November 2023 at 01:49 PM. Reason: Link updated
-
The Following 4 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
-
3rd May 2020, 03:50 PM #903
hi
I need a patch for Zumo 340 --- B1473 --- SW 4.20
thanks by advance
Toox
-
3rd May 2020, 08:53 PM #904
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
toox (3rd May 2020)
-
6th May 2020, 06:03 PM #905
Hello i download the file GPSMAP64_WebUpdater_560_JNX_Patched.gcd and install with web updater reboot the gps and see validated loaded 6% 15%and 66% no 100% and open i insert the sdcard and inside one folder GARMIN - gmapsupp.img , but the open the gps says Can't Authenticate Maps.contact content seller for help any idea maybe the upgrade didn't work because I'm checking to see if it gets the new one firmware ?
Last edited by diskjohn; 6th May 2020 at 07:59 PM.
-
6th May 2020, 10:38 PM #906
If the Firmware has been flashed you should view 5.61 as Firmware Release, if NOT repeat operation. Read for How to use WebUpdater
The Map you are going to use is UNLOCKED ot Not? This Patch allows reading of Unlocked Maps only, Locked ones will never be read.
-
6th May 2020, 11:55 PM #907
Hello Firefox58 and thanks for the helping ,ok I figured out how to upload the firmware I put it and it gives me patched version 5.60 I put a map 2020.30 unlocked and it worked normally, then I put the BirdEye folder I had and at the beginning when I open it I get the message Invalid file.JNX I press ok and when it opens it normally sees both the map and the birdeye
-
10th May 2020, 01:32 AM #908
garmin drivesmart 60 unlock patcher
helloo
pleas i need universal patcher for this garmin my maps i locked or crash..
i neddd something tto unlock my garmin device..
thanky you
-
10th May 2020, 03:40 AM #909
Open your garmindevice.xml with internet explore and confirm your HWID is 2268 then you can use the post that already exists.
-<Model>
<PartNumber>006-B2268-00</PartNumber>
<SoftwareVersion>450</SoftwareVersion>
<Description>DriveSmart 60</Description>
-
14th May 2020, 08:54 PM #910
As a kindly request by
This is a Patched Firmware (JNX + Unlocked Maps) for GPSMAP276cx APAC ver. 2.40
Since the GPSMAP276cx APAC (HWID: 3262) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Give feedback!
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
General current/recent map & meta...
As master meta collector, I am anxious to see the...