Results 561 to 570 of 1991
Hybrid View
-
13th September 2019, 01:36 PM #1
Looking for patched firmware Drivetrack 70.
astro320 Reviewed by astro320 on . Universal Firmware Patcher for Protected Garmin Devices Universal Firmware Patcher for Protected Garmin Devices v.1.10 This is an universal firmware patcher for protected Garmin devices. Many devices recently have a strong firmware protection and cannot use unlocked maps because firmware requires .gma and has MSV ( Map Signature Verification). In this list (http://www78.zippyshare.com/v/CWAOqHso/file.html) you will be able to check if your device firmware requires this patcher or if it just needs gingunlock+mapsigpatch or simply an .unl file Rating: 5
-
14th September 2019, 04:05 AM #2
Garmin Mod
Supporter
Please check in your garmindevice.xml to see your HWID is 2268 this is the ONLY way to confirm you are getting the right firmware for your device,the name and model is not.You also could have searched this thread by "2268" and found it already existed
DIY Patched and SD card kit
Drive, DriveSmart 60/70, and DriveTrack 70 software version 5.90 SD card Kit (HWID 2268 ONLY)
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed,so keep a copy of it somewhere safe.Last edited by Garmin_Nuvi; 14th September 2019 at 04:15 AM.
-
16th September 2019, 04:08 AM #3
Looking for either universal firmware patcher as the links are down or a firmware for "Edge 820". Thanks!
-
The Following 1 Users Say Thank You to kewlzero3 For This Useful Post:
- [ Click To Expand ]
-
DXOS3 (16th September 2019)
-
16th September 2019, 12:33 PM #4
As you don't specify which model, if Edge 820 or Edge Explorer 820, I made both ...
This is a Patched Firmware (JNX + Unlocked Maps) for Garmin Edge 820 ver. 11.20
Since the Garmin Edge 820 (HWID: 2530) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Changes made from version 11.10 to 11.20:
- Fixed a crash that could occur when riding with a cadence sensor.
Changes made from version 11.00 to 11.10:
- Added support for 12-speed shifting sensors.
- Fixed data field issues when using a shifting system with no front derailleur.
- Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
- Updated RTL510 and RTL500 light modes for Auto and Trail modes.
- Fixed Varia lights not activating when starting an activity.
- Made several improvements to the Sensor Details UI for Vector 3 power meters.
- Fixed average power balance data field not working correctly.
- Added the option to choose the radar alert tone.
- Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
- Fixed an issue where going through the data screen flow would automatically enable the screen.
- Fixed an issue preventing the device from manually connecting to a network SSID.
This is a Patched Firmware (JNX + Unlocked Maps) for Garmin Edge Explore 820 ver. 11.20
Since the Garmin Edge Explore 820 (HWID: 2531) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Changes made from version 11.10 to 11.20:
- Fixed a crash that could occur when riding with a cadence sensor.
Changes made from version 11.00 to 11.10:
- Improved calorie calculations.
- Fixed issue where radar would not automatically reconnect after being disconnected for more than 2 minutes.
- Updated RTL510 and RTL500 light modes for Auto and Trail modes.
- Fixed Varia lights not activating when starting an activity.
- Added the option to choose the radar alert tone.
- Fixed an issue where setting the device language through Garmin Connect would result in the language defaulting back to English.
- Fixed an issue where going through the data screen flow would automatically enable the screen.
Give feedback!
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
22nd September 2019, 05:28 PM #5
Are all drivesmart models(61?) unlockable?
-
22nd September 2019, 05:44 PM #6
Garmin Mod
Supporter
-
The Following 1 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
loki7777 (24th September 2019)
-
27th September 2019, 01:12 PM #7
<PartNumber>006-B3033-00</PartNumber>
<SoftwareVersion>360</SoftwareVersion>
<Description>zumo 396</Description>
Tks!
-
28th September 2019, 04:05 AM #8
Garmin Mod
Supporter
Unfortunately all the my normal firmware sources do not show anything for FWID 3033, with the current FW 3.60
only the previous FW 3.50
The only current one found was for APAC only ?
zumo 396, APAC 006-B3139-00 Release 2.80
As Genius3 said below FireFox68 created a Patch for FW 3.40
Check your PM.Last edited by Garmin_Nuvi; 28th September 2019 at 09:02 AM.
-
The Following 1 Users Say Thank You to Garmin_Nuvi For This Useful Post:
- [ Click To Expand ]
-
binhvt76 (28th September 2019)
-
3rd October 2019, 12:32 PM #9
did patch for v3.4 work?
-
3rd October 2019, 12:34 PM #10
Register To ReplyAdvertisements
Suggested Articles:
Staff Online
Meta.txt Collector-tool
Is this the correct file for truck maps a well?