Results 461 to 470 of 2029
-
31st May 2019, 05:06 PM #461
@floydo
I appreciate you getting Patch yourself but you must read instructions better ...
The GUPDATE.GCD will be there AFTER GE transfer it and ask Device to Reboot
-
31st May 2019, 08:00 PM #462
I did read the instructions, but it was not clear if the GUPDATE.GCD was modified by GE or transferred to the device. Looking at the .\system folder, not seeing it, I could visualize a scenario where the file was not there (modified by GE) and "very important" have to remove device or scramble to find the file.... prior to reboot taking place...so my question was a clarification (of the implication) in the instructions...again, apologies and thanks for your patience...
My old maps thank you as well
Update: Using methode 2 updated Drivesmart 61 to firmware 6.10 (no map update). Map and custom POIs work, but on starting from "off" get "maps are corrupt and cannot be used, go to GE to update" even though all maps work, and the warning continues after installing via GE new NT internally.
When memory card, with unlocked maps, is removed the cold boot warning does not appear. So firmware 6.10 has some check on the memory card unlocked maps, but they still work....
Will play with this some more, but may go back to previous 4.1 firmware package...Last edited by floydo; 2nd June 2019 at 02:07 AM. Reason: update
-
2nd June 2019, 02:51 AM #463
floydo, just for your info. I have a Drivesmart 61 updated to firmware 6.0 and unlocked map (Europe) on a sdcard and it works perfect. Custom POIs also works. Out of the box speed cam file does not. I created a custom speed camera file and it works perfect. I just got back from Slovenia and Croatia and it picked up all the speed cameras, I hope........
-
2nd June 2019, 07:22 AM #464
-
2nd June 2019, 06:42 PM #465
Dear FireFox58
I would like your assistance.
I have a GPSMAP 276CX with firm GPSMAP276cx_(2479)_430_JNXPatched.
Garmin has released (May 29, 2019) the new version v.4.60 for the GPSMAP 276CX
An new update for Firmware Patcher from version 4.30 to 4.60 would be useful as Garmin did an update.
I would highly appreciate any help provided!
Thank you very much in advance!!!
-
3rd June 2019, 12:52 PM #466
@
This is a Patched Firmware (JNX + Unlocked Maps) for GPSMAP276cx ver. 4.60
Since the GPSMAP276cx (HWID: 2479) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Give feedback!
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
dimbait (3rd June 2019)
-
4th June 2019, 01:42 AM #467
@ FireFox58 Thank you very much!!!!
You are amazing!!!!!!
I just upgraded my device with Patched Firmware ver. 4.60 and works perfectly!
And the maps and the Bridseye !
Once again thank you very much!
Last edited by dimbait; 4th June 2019 at 03:44 AM.
-
4th June 2019, 02:28 AM #468
Hi,
anyone already got a chance to patch the Edge 830 v3.20 Firmware?
<Model><PartNumber>006-B3122-00</PartNumber><SoftwareVersion>320</SoftwareVersion><Description>Edge 830</Description></Model>
I tried using this Patcher by myself, but doesn't seem to do anything:
Firmware version as specified in GCD file: 3.20 for Unknown device (HWID 3122).
Firmware version: 3.20 for Unknown device (HWID 3122).
Applying rule set MSV... No matches.
Applying rule set GVS... No matches.
-
4th June 2019, 07:05 AM #469
Hi Firefox58 or anyone else,
Do you have the patched firmware for Drive Assist 51 LMT-S with latest updates. Want to add Africa maps to Internal storage, 8Gb free.
<Model>
<PartNumber>006-B2590-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>Garmin DriveAssist 51</Description>
Any help will be appreciated.
-
4th June 2019, 04:31 PM #470
This is a custom SD flash kit only for HWID 2590 devices (Drive Assist 51), firmware version 6.10
Changes made from version 6.00 to 6.10:
- Improved the reliability of connections to BC 40 backup cameras.
Instructions: see
DriveAssist 51 (2590) fw6.10.rar
-
The Following 2 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
World/Europe Speedcams from SCDB
But this is a new invention of thieves. To steal,...