Results 251 to 260 of 1995
-
28th January 2019, 10:59 PM #251
Hi I'm having the exact same problem
on Drive 51 HWID 2586 Firmware 440.gcd
original firmware 380.gcd
Could someone make me a SD Flash kit with FW3.8
I have tried moving a patched 380gcd into the system folder with unit turned but it didn't work on restart.
Should i have removed the xml file first ?
Or should i have simply edited the xml file to say SoftwareVersion 370 SoftwareVersion
-
29th January 2019, 12:52 AM #252
@Baksidar
Do you have problems with routing? Which Maps are you running?
BTW, putting Patched Firmware into device won't never work because of GSV protection.
You should use microSD to boot.
Tomorrow I will prepare an SD Package for you.
-
29th January 2019, 01:03 PM #253
@
This is a custom SD flash kit only for HWID 2586 devices (Drive & DriveSmart 51), firmware version 3.80
Drive and DriveSmart 51 (2586) fw3.80.rar
Instructions: see
Give feedback!
-
The Following 1 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
RingoTB (6th September 2019)
-
29th January 2019, 09:06 PM #254
Hi Firefox,
Just to be clear i have previously unlocked the device using SD package with FW 4.40
The map shows up fine in my map list.
Thinking it is just latest firmware giving routing problems using thailand CN 2018.20 map
I use same map on my 200w Nuvi and all is good.
I wanted to use roll back to older firmware as user ZDMAX has reported alls good on older firmware.
Is the 380GCD file patched or not
If so is it better to copy gcd into system folder in garmin and reboot using kit on sd card or place everything on card and reboot
-
29th January 2019, 09:08 PM #255
-
29th January 2019, 11:30 PM #256
If you place an older release of firmware, even if Patched, this won't be loaded by device.
You must use WebUpdater to make a Downgrade, and Manual confirm this.
In my Package I forced an higher Firmware release, bypassing the above control.
Okay
-
30th January 2019, 12:18 PM #257
Hi,
Can someone please help me with a custom SD flash kit for a DriveAssit 50?
HWID2270 FW5.90
<PartNumber>006-B2270-00</PartNumber>
<SoftwareVersion>590</SoftwareVersion>
<Description>DriveAssist 50</Description>
Thanks in advance.
-
30th January 2019, 01:16 PM #258
@
This is a custom SD flash kit only for HWID 2270 devices (DriveAssist 50), firmware version 5.90
DriveAssit 50 (2270) fw5.90.rar
Instructions: see
Give feedback!
-
The Following 3 Users Say Thank You to FireFox58 For This Useful Post:
- [ Click To Expand ]
-
-
30th January 2019, 04:19 PM #259
Hi Firefox,
Package successfully loaded and patched 380GCD copied to system folder
All looks good, will try routing in a few weeks when back in Thailand
Thank you for your help
Will give more feedback if 380 firmware works in Drive51 using Thai CN Navigator 2018.20, good for info for anyone else
-
30th January 2019, 05:53 PM #260
@FireFox58
Thank you for your prompt reply.
Now my GPS can see the unlocked map and positioning correct on the map.
But I have very same problem as user Baksider about routing on the unlocked map.
I can simulating the routing (turn on GPS Simulator) on the original US Map.
But cannot simulating the routing on the unlocked Local Map.
Look like I also need to rool back to older firmware as 5.40 too.
Would you please custom another SD flask Kit to patched the firmware back to version 5.40
Thanks in advance.
General current/recent map & meta...
Thanks Biggerdave. RunMeForCode is very...