Results 1 to 10 of 11
Threaded View
-
12th October 2019, 04:40 PM #1
Ford Sync3 8/16/32/64GB to Europe tutorial - Maps, Soft
What's the problem?
US navs have less space than EU versions of the same so you're not able to install EU maps without this hack.
What you need:
1. 32GB pendrive
2. Notepad ++
3. UCDS or ELM327 (with HS, MS, MM can support - most of them based on STN chipset)
4. ForScan (with extended license - free for 2 months) - available at
Required files:
Sync 3.3 update:
Sync 3.3 Voice:
Voice Nav files:
Gracenotes:
Maps (F8 - 2019):
Map license (for F8 - 2019):
Dab files:
Pendrive preparation tutorial:
1. Format pendrive as FAT32
2. Download all above files
3. Create empty directory in pendrive called "SyncMyRide" without quotes
4. Place all above files in "SyncMyRide" directory (do not unpack or rename them!)
5. Add file attached to this post to "SyncMyRide" directory (do not unpack or rename!)
6. In main root at pendrive create file called "autoinstall.lst" and edit it in notepad - paste below content into this file:
7. In main root at pendrive create second file called "reformat.lst" and edit in notepad++ - paste below content into this file:
FOR 64GB version:
FOR 8/16GB (non-nav) versions:
Car tutorial:
1. Connect with ForScan - go to module programming and backup "APIM" module configuration to file
2. Start engine ON and connect Pendrive, wait for update - press break pedal every 10 minutes to not power-off nav
3. After update complete (green screen) disconnect pendrive
4. Wait for nav system load, master-reset it two times !! and move key to ACC OFF, start engine again, wait for nav to load and hard reset nav system two times by pressing seek right + power
5. Connect with Forscan - go to module programming and load configuration from backup - sometimes this step is not required - depends on car - if you have UCDS you can do this by importing config by car VIN without any backups.
Additional info:
1. APIM module contains country code, so you can change car region by updating hex code:
7D0-02-01 **** xxxx xxxx
in place of **** paste country code ASCII to HEX ( )
example:
PL - 50 4C
DE - 44 45
US - 55 53
CA - 43 41
etc.
2. 32GB isn't able to contain all files from 64GB version so in reformat LST you need delete some lines like: GRACENOTE, Unneded VOICE files (leave only your language), some maps where you're not going to go.
3. Nav voices
A - DUN, ENG, FR, DE
B - IT, PT, SP, TR
C - CZ, PL, RU
D - DUN, FIN, NOR, SW
4. Map content
A - COMMON - ALWAYS REQUIRED!
B - EXT - ALWAYS REQUIRED!
C - North UK - Dania, Finlandia, Wielka Brytania, Irlandia, Man, Islandia, Norwegia, Szwecja
D - Iberia - Hiszpania, Gibraltar, Portugalia
E - France - Andora, Szwajcaria, Francja, Monaco
F - Central - Austria, Belgia, Czechy, Niemcy, Liechtenstein, Luksemburg, Holandia, Polska, Słowacja
G - EU South - Albania, Bośnia i Hercegowina, Grecja, Chorwacja, Węgry, Włochy, Czarnogóra, Macedonia, Malta, Serbia, Słowenia, San Marino, Turcja, Watykan
H - EU East - Bułgaria, Białoruś, Estonia, Kazachstan, Litwa, Łotwa, Mołdawia, Rumunia, Rosja, Ukraina
J - EU Cyprus - BS?, CU?, Cypr, NC?
5. Example reformat.lst for Polish language and maps for 32GB version:
KacperA Reviewed by KacperA on . Ford Sync3 8/16/32/64GB to Europe tutorial - Maps, Soft What's the problem? US navs have less space than EU versions of the same so you're not able to install EU maps without this hack. What you need: 1. 32GB pendrive 2. Notepad ++ 3. UCDS or ELM327 (with HS, MS, MM can support - most of them based on STN chipset) 4. ForScan (with extended license - free for 2 months) - available at What's new (https://forscan.org) Required files: Rating: 5Last edited by pe1agp; 12th October 2019 at 08:45 PM.
-
The Following 4 Users Say Thank You to KacperA For This Useful Post:
- [ Click To Expand ]
-
bodoque (23rd January 2021), damascus7 (16th December 2020), deirosjuan (3rd January 2020), edgaropoland (21st October 2019)
City Navigator North America NT...
You are right. It's working after moved it in map...