Activity Stream
245,396 MEMBERS
1196 ONLINE
GPSurl On YouTube Subscribe to our Newsletter GPSurl On Twitter GPSurl On Facebook GPSurl On Google+
SE 9.701 TRUCK NAVCORES for other devices

Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45
  1.     
    #1
    Administrator
    biggerdave's Avatar
    SE 9.701 TRUCK NAVCORES for other devices

    GPS Truck SE 9.701 TRUCK NAVCORES for other devices

    Here's my current (and the latest) pre-patched 9.701 set attached to run the truck map on other devices

    These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself.

    Zippyshare (dlc's) attached (use Jdownloader) see
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.


    Download your selected attachment from below, extract/unrar/unzip to get the .dlc file then copy to/use Jdownloader to download the actual dump folder. Then just extract/unzip/unrar that downloaded .rar, copy the contents of the extracted folder to a 4Gb SD, MicroSD or SDHC card (minimum class 4 but preferably class 6 or higher) or direct to your internal memory on a 910/920/930/940/950, copy/add your ttgo.bif file from your backup or internal memory, add the new Truck map folder (currently v945) from
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.
    . Then just crack the map using the latest version of FastActivate, TTusers Easytools, Bobbys TTool, BBS Tools, Alberts EasyActivator or other favourite tool from TomTom Open Tools & Tweaks to create a meta.dct AND a tmeta.dct in the map folder & activate the celebrity voices and away you go.
    Remember you can have the navcore on the internal memory and the map folder on an SD card BUT ONLY on the x20/x30/x40/x50's, NOT on any older devices where they must be together (internal or SDHC card)

    Only proven to work with x00, One's, One XL's incl One XL HD Traffic (NOT One XL IQ), x10, x20, x30, x40, x50's provided they have an SD/MicroSD card slot or 4GB internal memory like the 910/920/930/940/950.

    Notes:

    1. The version for the x20, x30, x40, x50 is just a clean/full dump of an original navcore (not just the .cab) which is suitable for these devices.

    2. Specifically for the GO 700 you will need to remove the following to get this to fit on the 2.5Gb internal memory (because this was created for the non-mic 300 & 500 and therefore doesn't have the ASR folder)
    2a. From the navcore:-
    Vocaliser folder (no more computer voices), Helpme folder (no more straight to nearest doctor/dentist etc) and remove all but 04 & 05 (UK) voices from the voices folder.
    2b. From the map itself:-
    Cphoneme (used only for Loquendo & Vocaliser computer voices), Cspeech (no spoken address INPUT), crpoi (Compressed Rich Point Of Interest). No more "rich detail" (to see the "rich" detail select Navigate to ... Point of Interest ... POI near you ... select one of the built in categories ... select a POI ... If there is rich detail for that poi then a Details button appears under the phone number on the right of the screen. Click the Details button to see the the rich detail. This is often an address, web site url and email address but is technically capable of including any text and also pictures) and, if you need even more space, faces.dat & faces.met (no more polygons, lakes, forests, buildings - just roads and streets)

    3. For all pre x20 models like the x00's, Ones & One XL's, 510, 710 (but NOT the 910) that were not designed to read SDHC's or have not previously seen/booted from an SDHC card, you first need to load a suitable bootloader (system file) to enable the device to actually boot up from your new 4Gb SDHC Truck card. The easiest way for you to do this is to copy/paste/overwrite the "system" file (extracted from the attached TT_Bootloader_5.5120.rar or from any of these downloaded dumps to your current standard SD card or internal memory and boot up once with that new system file THEN it will read your new SDHC card.

    4. Specifically for the x10 series to reduce/minimise the possibilty of rebooting/restarting, switch the unit on BEFORE connecting to your power source.

    SE 9.701 TRUCK NAVCORES for other devices

    [Login or Register to remove this advertisement]



    5. A couple of problems/solutions are also explained here:-
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.


    6. And finally, if you only have 2Gb internal memory & no SD slot then your only option is to try one of these
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.




    If you only need the official .cab (for x20/x30's) you can download it direct from
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.


    I would appreciate any feedback or comments (good or bad) for these too
    biggerdave Reviewed by biggerdave on . SE 9.701 TRUCK NAVCORES for other devices Here's my current (and the latest) pre-patched 9.701 set attached to run the truck map on other devices These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself. Zippyshare (dlc's) attached (use Jdownloader) see How to use JDownloader/Cryptload dlc/ccf container files & linksave (http://www.gpsurl.com/tomtom-tutorials-faq/178725-how-use-jdownloader-cryptload-dlc-ccf-container.html) Download your selected Rating: 5
    Attached Files Attached Files

    SPAM HUNTER/KILLER
    Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/left
    S i m p l e s

  2. The Following 25 Users Say Thank You to biggerdave For This Useful Post:
    [ Click To Expand ]

    4Wheel (9th October 2017), aleks618 (17th February 2019), Alfred_ML (5th April 2015), ASİ06 (3rd May 2020), caridi11 (24th June 2013), catel9 (26th April 2019), Charlie62 (19th May 2013), christianK (29th July 2013), erpopi5 (15th September 2016), etesia (1st December 2014), gps4 (9th June 2013), hakalo (29th June 2013), jimbobc (26th September 2016), kazupp (15th May 2013), kelmatv50 (11th March 2014), Lloyj (12th June 2017), luravi (10th January 2018), mighel (1st December 2013), Mobile_Guru (2nd June 2013), moki71 (7th October 2013), premiere99 (16th May 2013), Sebastian79r (18th June 2013), yopmismo (7th March 2019), zole (30th November 2014), zomikula (24th November 2013)

  3.   Advertisements

    SE 9.701 TRUCK NAVCORES for other devices
  4.     
    #2
    mark cat's Avatar

    Default TRUCK Navcores for Go X20/X30/X40/x50 DSA+SE

    Pack con il nuovo Navcore 9.701, Patch DSA per GO X20, X30, X40, X50





    You can have both 2 and 3 panel, just add or remove the .1 to the string -> build = 1238656.1
    What is in the file fleetecd / ttw.bif






    This pack is in X40 emulation
    For changing the vehicle, with three panels to do so:
    Enter the skins folder, open the file reskin and instead of 24 starts -> 37, instead of x40 -> x50

    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.



    Navcore 9.701 SE, patch by Tonyzeta




    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

  5. The Following 13 Users Say Thank You to mark cat For This Useful Post:
    [ Click To Expand ]

    basflt (20th May 2013), biggerdave (29th May 2013), daniele57 (2nd June 2013), etesia (1st December 2014), icare (30th May 2013), Mobile_Guru (2nd June 2013), moki71 (24th November 2019), nilude71 (25th January 2017), oxili (20th May 2013), tarkan55 (29th September 2016), tonyzeta (20th May 2013), vtv2000 (17th February 2014), yuriyggg (20th May 2013)

  6.     
    #3

    Default Re: TRUCK Navcores for Go X20/X30/X40/x50 DSA+SE

    Top man, Works perfectly with my 710.

  7. The Following 1 Users Say Thank You to icare For This Useful Post:
    [ Click To Expand ]

    biggerdave (2nd June 2013)

  8.     
    #4
    Administrator
    biggerdave's Avatar
    SE 9.701 TRUCK NAVCORES for other devices

    Default Re: TRUCK Navcores for Go X20/X30/X40/x50 DSA+SE

    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.


    Thanks for the feedback. Which version did you use?

    SPAM HUNTER/KILLER
    Please do not just post "thanks" but use the "thanks" button bottom/right or the reputation star "*" bottom/left
    S i m p l e s

  9. The Following 1 Users Say Thank You to biggerdave For This Useful Post:
    [ Click To Expand ]

    tarkan55 (29th September 2016)

  10.     
    #5
    kazupp's Avatar

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    Pack-9.701-DSA-GO working more smoothly on my go750 than SE from first post. Over 12MB free RAM (10 in SE). Light sensor working properly.
    The only "problem" is that unit not switching off anymore when power source is off. Any solution for that?

  11. The Following 2 Users Say Thank You to kazupp For This Useful Post:
    [ Click To Expand ]

    biggerdave (2nd June 2013), tarkan55 (29th September 2016)

  12.     
    #6
    jarkita's Avatar

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.

    On/Off button? ;-) And seriously - it may be one of limitations of SE navcores ...

  13.     
    #7
    kazupp's Avatar

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.

    But in SE navcore this function is working fine. The same in 9.700 DSA, so maybe it is something simple to change?

  14.     
    #8
    GPS Contributor
    Advisor
    Helper
    basflt's Avatar
    SE 9.701 TRUCK NAVCORES for other devices

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.


    you sure you enabled it in the menu ?
    it works normally on my 750 ( orig navcore )

    if so , try x50 emu

  15.     
    #9
    kazupp's Avatar

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.

    Yes, I am.
    Original navcore - working, SE navcore from first post - worrking, navcore 7.900 DSA - working,
    navcore 9.701 DSA from second post - not working. I checked all emus - x20, x30, x40 and x50 with the same result. I did reset after every switch to different emu.

  16. The Following 1 Users Say Thank You to kazupp For This Useful Post:
    [ Click To Expand ]

    tarkan55 (29th September 2016)

  17.     
    #10
    GPS Contributor
    Advisor
    Helper
    basflt's Avatar
    SE 9.701 TRUCK NAVCORES for other devices

    Default Re: SE 9.701 TRUCK NAVCORES for other devices

    then dont use that one then

Page 1 of 5 123 ... LastLast

  Suggested Articles:

SE 9.701 TRUCK NAVCORES for other devices

Similar Threads

  1. SE 9.702 TRUCK NAVCORES for other devices
    By mark cat in forum TomTom Truck and Camper
    Replies: 128
    Last Post: 17th July 2017, 09:04 PM
  2. SE 9.700 TRUCK NAVCORES for other devices
    By biggerdave in forum TomTom Archive
    Replies: 42
    Last Post: 5th May 2013, 05:52 PM
  3. SE 8.398 TRUCK NAVCORES for other devices CLOSED
    By biggerdave in forum TomTom Truck and Camper
    Replies: 9
    Last Post: 20th January 2013, 04:18 PM
  4. What's the best navcore for my device
    By Bitchkilla in forum TomTom Tutorials & FAQ
    Replies: 0
    Last Post: 26th December 2011, 11:08 PM
  5. What’s the best Navcore for my device?
    By biggerdave in forum TomTom Navcores
    Replies: 0
    Last Post: 26th December 2011, 10:40 PM

Tags for this Thread

Amount:

Enter a message for the receiver:
BE SOCIAL
SE 9.701 TRUCK NAVCORES for other devices SE 9.701 TRUCK NAVCORES for other devices SE 9.701 TRUCK NAVCORES for other devices GPSurl On Facebook SE 9.701 TRUCK NAVCORES for other devices