Yes, I had navcore 9.205, now it is 9501a inside, I tried to replace the glgps file from your version 9541c_64MB but it didn't help, I still can't find GPS. I send 2 pictures one after 26 minutes of waiting for GPS and the other after 45 minutes.
Printable View
Yes, I had navcore 9.205, now it is 9501a inside, I tried to replace the glgps file from your version 9541c_64MB but it didn't help, I still can't find GPS. I send 2 pictures one after 26 minutes of waiting for GPS and the other after 45 minutes.
The good news: you are receiving satellites. So your rider is not like a brick.
Its not calculating the position.
Are you outside of a building?
You use 9501a, but not the glgps from 9541c?
or
use original 9205, but glgps from 9541c?
You really deleted anything but the map before installing the 9501a?
I'm outside, I deleted everything, later I formatted my internal memory for Fat, and then I installed your navcore 9501a, turned it on for a moment, waited for the no map message to appear, and uploaded the map.
I also tried on my original navcore 9.205, with a glgps file from 9541c, but also did not catch gps.
is there still a way to fix my GPS?
One last try. If this doesnt help I'm really sorry ;-(
Remove all files inside folder "ephem".
Start TT as usual.
Press Power Button for at least 15 seconds.
TT should start with an information screen. (CPU, memory, gps type, etc.)
Press power button again
also this way was not good for GPS repair in my rider. I am waiting for sure someone will find a way to it (As now for Nav3), maybe some fix. Thanks for your time and help.
Use TomTom clearflash tool. It wil clean inside the Rider. Than download official Rider navcore and the rest you know. I know it must work. I think that you tried to install wrong QuickGPSFix. So Clearflash wil clean internal memory. Be sure that your device has enough power before you use Clearflash.
- Empty the internal memory.
- I installed the navcore 9500.
- Start the gps, it should put no maps.
- Install the map and activate it.
- Disconnect the gps from the pc safely.
- Start the gps.
- Connect the gps to TTHome.
- Update quickgpsfix.
- Disconnect the gps from the pc safely.
- Start the gps outside the building.
- Notice that ball spins ... https://i.imgur.com/dd15PAz.png
- Wait up to 45 minutes.
The navcore is from my friend MaSp in forokeys.
Does that thing I point to with the red arrow go round?
https://i.imgur.com/r5fmPUE.png
Take a picture of your black screen.
You reach the black screen by resetting and pressing the power button until it is displayed.