Printable View
Thanks, I try, hopefully good
Hello, I followed the procedure, I created the sdmagic. Everything's ok untill [ 3) Enable ADV and root ], but it blocks at [ 4) Copy packages ], it says no connected device.
Thanks
Check the manual after enabling ADB ROOT, you must restart, step 4 Copy packets The device has to be in normal operating mode, it does so ???
and do not have the PC connected to the PC, phone, phone or any other.
regards
@ simba
Thank you for your replay, I know very well the manual. After step 3 and after disconnecting sdmagic, I restarted it but isn't in normal mode. So I can't carry on with step 4. No phone or tablet is connected to the computer.
ciao
Maybe put Navcore .ttpkg package that corresponds to him;
TTB_ServiceUpdateTool.jar
regards
Hi, the same problem here. The opening logo freezes after the update from MDC. I can't do anything, can't connect with the laptop or MDC.
The opening sound is different it repeats a many times.
My device is TT Go 40.
Thanks in advance.
can you put it into recovery mode ?
https://imgyukle.com/f/2022/05/06/RzCZX1.jpg
the black screen does not appear. Just this screen appears and with tihs I can't do anything. I tried it so many times.
OK try to flash and re-flash navcore/software again
So double clikk into TTB_ServiceUpdateTool , so now open into Browse and load the file: 00000000-0311-0020-1000-69f2778f0001_system-update.ttpkg , connect your tomtom to Pc and so press enter and wait for loading the software inside your tomtom , if you have error , then try again and again so many times
you must have Java last version in your Pc
if TTB no works then use TTActivator to flash this navcore/software , how to ?
1. connect your tomtom to Pc as is it like into your photo
2. open TTActivator
3. wait for TTActivator can recognize your tomtom or push to refresh
4. go to NAV3/NAV4 Tools into TTActivator
5. push into: Install TT Package File
6. search for this file inside your Pc: 00000000-0311-0020-1000-69f2778f0001_system-update.ttpkg
7. done, wait for your tomtom restarts after loading navcore ... also if TTAcativator run until 66%..it's good too