Sometimes the patch doesn't start to me too .... Either you do it manually or do it yourself ... But it's not a problem !!!
Printable View
Sometimes the patch doesn't start to me too .... Either you do it manually or do it yourself ... But it's not a problem !!!
@Warga It always happens to you? You can try to remove and put patch again.
My opinion, electronics has points that sometimes in the same situation reacts differently, operation is something that is not seen with the naked eye and seems difficult to explain.
There are jobs that are more easy to see the mistakes they have, example a carpenter makes a wooden door physically can be seen because sometimes it closes and others not, in winter it "swells" and in summer it "compresses"
@Jovesp1975
The patch enters automatic mode only with original, if you put any emulation it stays as it should be manually moving forward
regards
you always have to do updates in MD and only the patch will come
@Simba
thanks for the reply. That's exactly how it is. I tried it without emulation, it goes into automatic navigation mode alone. I have another question: I have the camper emulation, then comes after about 1minute, the message: Patching failed and the boot process continues after a short time, without me doing anything and then comes the next message: Patching already downe! Does that mean that Navi has been unlocked? The camper emulation and navigation work well
I do not understand exactly, keep in mind that 2 starts first loads the system and second loads the patch, it seems that in some devices you can see more in others less.
or perhaps what indicates that he first starts saying failed patch, entered only into an original map, then when he says patching he would follow on the original map, he would manually have to change to a paveled map.
I recommend that if you find problems, uninstall and reinstall.
From what I have seen the patch is universal for NAV4, but NOT all NAV4 contain the same hardware, different manufacturers work for Tomtom.
regards
hello Simba
I have it 610 after patching it is terribly cut
icons overlap
and the go 500 with the same preparation is much better, smoother
what am I doing wrong ?
I don't know where to go wrong
It is very strange that the icons look bad;
The patch should not be the culprit, but to check unistall and reinstall.
If you have disassembled, check the screen connection flex.
Another possibility is that when loading the system any file is corrupt, you can make a reset, is to keep the boot button to the black screen, then start normal and comment if it continues to fail.
regards
go 60
21.200.000311
works
truck and camper is on now
after 8h of research id done.
Start 40
21.200.0003.311 + MSTMS Patch + map Europe HM TRUCK
Works