I have received the Via, it has the radars installed but expired. I do not know for sure what radars it has but I think that normal ones are not premium.
Warns of radars, those that are old.

I'm going to try to install the premium ones.

I install the current radars of the countries that the gps has already installed.
The notice that they are expired but not working is removed, it does not notify.
I install the patch MSTMS
They don't work.
I perform a reset, they still don't work.
I put the radars on the card does not recognize them.
I put the Iberia map with all the radars that the gps has installed, 25 ov2 files on the Iberia map.
I make a route on Iberia and now warn of radars with this map on the card.
I take out the gps card and return to the purchased Europe map to follow the same route as before that I did not notice.
Remember that now there are no radars on the card.
The gps does not sing the radars.
I put the card back and continue with the map of Europe, the radars don't sing.
I perform a reset.
Still without warning of radars.
I create the same route of the Iberia map as if it warned on this Europe map.
Still without warning of radars.
I am going to select a map, the Iberia map is missing.
I take out the card and put it back now if you see the map.
I make a route with radars warns the radars.
I return to the map of Europe with the same route that I have used in Iberia and if it warned me on that map.
Does not warn of radars.
I reinstall the ttpkg packages from the radars with TTActivator and restart the gps with TTActivator.
Start with the Europe map and the route you had on the Iberia.
Does not warn of radars.
I deactivate the warnings, reset and re-enable the warnings, it does not warn.
I format the card, I put the same map of Europe on the card with the same radars that are in MI.
I create the route on the map of the card, I do the demo and if it tells me about the radars.
I go back to the IM map and do the demo.
It does not warn me of radars.
I go to the MDC and uninstall all the radars one by one.
To uninstall you have to do it twice for each radar and close and open the MDC on each uninstallation, some three times.
First it looks like this:

I uninstall I close MDC and reopen and it looks like this:

I uninstall again I close and open MDC and it has already been completely removed:

In the whole process it is better not to touch the gps since the "Done!" in every maneuver. Accepting that screen only slows down the operation.
Removing all installed radars took me two hours, and thankfully there were only 25.
Using the repair option does not work.
I believe that before installing the radars there was a normal version and I installed a premium version that has caused neither version to work.
After deleting all MDC displays this image.

I install two premium packages the one from Spain and the one from the Netherlands to test, I put the ttpkg package from TTActivator.

[Login or Register to remove this advertisement]

Radars do not work.
I do a reset and repeat the route, the radars do not work. Radars cannot be installed as ttpkg?
I will try to install as ov2 ... I

Install and perform a reset.
I recreate the route and do the demo.
Notices do not work.
I set the notice since Manage pdi doesn't work.
I put the card with the Europe map and the radars do not warn me.
I'm already totally clueless but I think the ov2 that I have installed is doing something.
I remove the ov2, I put the map of the card and I make the demo now if the warnings from the card work.
Without removing the card I install the premium file from Spain again, reset and select the map of the internal memory, now if you let me know.

With the whole process I have made sure that you cannot install the radars only in the internal memory in any way.

The official radars in the internal memory will only work if they are on the map of the card and the card is in place and those radars have been working, that is, if you have the radars of Europe and you have not circulated in a country even if you install the radar of that country in the internal memory will not work, you must first do it on the card.



You must uninstall all radars from the map from internal memory before putting radars from TTActivator.
My advice is not to install "ttpkg" radars in the internal memory.

Orni Reviewed by Orni on 13th June 2020. My bad experience with official radars on Via. I have received the Via, it has the radars installed but expired. I do not know for sure what radars it has but I think that normal ones are not premium. Warns of radars, those that are old. I'm going to try to install the premium ones. I install the current radars of the countries that the gps has already installed. The notice that they are expired but not working is removed, it does not notify. I install the patch MSTMS They don't work. I perform a reset, they still don't Rating: 5

I don't quite understand what Simba means.

The ttpkg packages are downloaded only with a ".ov2" file, they do not have a ".ver" file.

I have not put ".ver" files on the card, they are not necessary, they work well without that file.

To the internal memory I have installed the package "ttpkg"

I am looking into the .ov2 issue. I am checking if it is possible to convert the official TT .ov2 radars from the protected/encrypted format into the unprotected format so you can upload using the community content menu.

EDIT - I tried this and it did not work unfortunately, but the real problem & fix is available in below posts.

OK, I've done a bit more research. The issue is due to having an expired safety camera subscription. The old .dct remains on the system and it prevents the cameras from working. These need to be deleted so it can be re-activated using the built-in keygen - unfortunately these are stored inside the internal memory so it's not easy to access. I will see if a special *.ttpkg can be created to erase these.

@Orni and others with radar issues:

Please try installing the attached *.ttpkg file (extract from the RAR first). You can use TTActivator or the "Upload_ttpkg file uploader". Once installed, please reboot the device.

It will then remove all radar licenses (all *.ov2.dct files) from the internal memory and automatically reboot the device. When the device starts again, the official TT radars should work now if there is a meta code available.

Radars can be installed using the "Safety Camera Downloader" tab in TTActivator.

Please test it out and let me know how it goes.