My report:
Go 950 with 9.541 not a single problem, time correct
Rider v2 start at at 09:30 local time with 00:30 H with Navcore 9.500, hard reset time set to 09:30 H hard reset time 09:31
TomTom One Third edition Navcore 9.541 no time displayed, while I want to adjust the clock manual, it displayed 18:32 H more or less the local time at Australia
after a hard reset still no time availble on the screen while the setting are correct to display all the times available, now trying to receive any satellite
Rider v2, I've made a route to Hoek van Holland, after receiving signals, distance and the time to get there are correct, start a demo, start time demo at 09:43 arrivel time will be 10:22
TomTom One XL 9.541, start with the information screen with for me a strange sound which is very similar to the next patient at the family doctor, the time is indicated correctly
Calculate the time to Hoek van Holland 42 minutes which is more or less the same as from the Rider v2
The strange sound I think I've made a mistake when copying the files, I'll put back the normal drumroll.
While my Rider v2 is halfway, the route is OK and the time the same, my TomTom One third edition refuse to receive any satellite.
My Rider v2 has completed the ride and arrived at the destination as indicated at the correct time, I do not expect any further problems
While the One XL and the One third version are still searching for a satellite signal, I think that they will respond exactly the same and it all
comes down to the fact that the time must have some time to recover from the shock, just like many owners of the various TomTom's