The problem, as I said previously, is that I haven't been answered from globalsources.com
I know that an SD card can be used in any SD capable device.
Thanks.
Printable View
@Perrosucio: Let the seller time for an answer. It's cristmas-time and a vew of shops are closed at this time.
I don't edit old postings, if a new ask is written. In this case editing isn't helpful...
Independent thread is a good idea.
this can help you can buy only 1
sd samsung evoplus; EYE, move mouse 2 right orange box 64 GB Korea
according to this link the KOREA evoplus sd if you can change CID with evoplus_cid program
discharge,
tuto,
http://i63.tinypic.com/xdtfus.png
regards
Have you purchased one simba?
I'm waiting to see if it works with this model... if it works, I'll buy one.
For what you comment, being of KOREA, it should work without problems, but I'd better hope that the people who try it comment the results.
Thanks for search in aliexpres simba.
Regards
if I bought one and put KOREA, but I have not tried it I have reserved for another project, I do not know if you can change more than 1 time the CID.
EYE if you buy it when you pass the mouse that puts 64GB KOREA, box marked in raranja in the photo,
P.S. the SD has to connect directly to the reader of the laptop to recognize it as SD, if you connect with a card reader via USB the desktop PC reads it as a volume or hard disk and it does not work
regards
Wrong - these SD cards won't work -
On the other hand - nobody knows why they don't work... Maybe cause concrete CID is not fully legit? According to mentioned about item, they claims CID as
094150414620534402134dac27011300
But it's not exactly such - real CID is
094150414620534402134dac270113cb
Maybe not all SD cards such sensitive to last two digits (control ones), whilst others - are...
PS Alas, even owing modimo's spoof-SD adapter, at the moment I have no TT device to check up both CID - so can't make any conclusions even about 1 issue...
I confirm the information of the post #16 that this EvoPuls SI changes the CID
original cid KOREA; Model:MB-MC64D Model code:MB-MC64D/CN , data=1-2018
1b534d30303030301072645d86010b0b
-------------------------------------------
new;
09415041462053440219c1e7030121ad
-------------------------------------------
instructions link post #16
steps followed with Debian; Debian GNU/Linux 8 (jessie) 32-bit
the path /dev/mmcblk0 (mmcblk1) may vary according to the Ubuntu, Debian, etc ...
root@simba:/usr/local/src/evoplus_cid/jni# ./evoplus_cid /dev/mmcblk0 09415041462053440219c1e703012100
Writing new CID: 09415041462053440219c1e703012100
Success! Remove and reinsert SD card to check new CID.
root@simba:/usr/local/src/evoplus_cid/jni# umount /dev/mmcblk0
umount: /dev/mmcblk0: no montado
COMPROBADO, CHECKED
root@simba:/usr/local/src/evoplus_cid/jni# more /sys/devices/pci0000:00/0000:00:14.4/0000:06:06.3/tifm_sd0:3/mmc_host/mmc3/mmc3:0001/cid
09415041462053440219c1e7030121ad 2 last digits It's not important
working in R-Link Renault
PD.is it necessary to confirm if the CID can be changed again more times, when the new map comes out, marky1991?
regards