try ;
put navcore on the card and empty internal
Printable View
try ;
put navcore on the card and empty internal
I've already done, the problem is that it does on the sd card and internal memory.
The problem must be on your device.
I posted to burn the last round, if anyone happened here.
I've never seen the same or similar case.
Thanks basflt.
remove the card
restore original
connect to Home and update
if that dont solve , you may have hardware issue
Also I've done, what I do was go step by Clear Flash but still the same.
Even I formatted the internal memory and still the problem.
If it must be hardware.
I'm buying a second hand, this gps for testing.
I thank you all for your cooperation.
Best Regards
If you still don't want to read the tutorials, what are you doing here when you're more or less already an expert ?
That you need to reset everytime the GO models is a wellknown problem.
Try to live with it as some doctors say, or buy another model which don't have that issue.
Take it or leave it, but don't abuse other members, please.
Use any contribution as it is.
pe1agp, loose talk, tiener not anything better to do?.
Read post # 12, and do not write for writing.
The topic has been locked, and I find this nonsense.
Yes, the closing theme in post # 14.
I apologize if I had to warn of the closing.
Best regards.
Try to disable the watchdog and see if it boots.
Take care, that some SD cards are crappy manufactured and windows/mac doesn't format whith SD compliance necessary.
If you got whith problems with SD I recommend to use (available for windows and mac)
Also depending of your SD maybe you will get a better performance formatting it in FAT16 or even FAT12 than FAT32... there are a lot of studies around the net...