Hi, Medianav 3 -> I installed/retrofitted it on a Renault Megane 2, the Medianav car radio was Virgin/new, it had not before been put on any car, it was in [Connect diag tool] mode.
I put all the parameters (map code, audio / acoustic drivers , gps, VIN code, date 01/01/01, etc.) through a CAN Multimedia interface, using DDT, and it worked well, except that the licenses and maps were not present, because the radio unit was as I said, unconfigured before ... I put the GPS function active from the first configuration, with the map code I put WEU from the first setting (From the first phase connect diag tool) ... The navigation is now mounted on my car, a Renault Megane 2, I did retrofit with microphone mounting, Rear view camera, steering wheel controls, everything works, including Android car, less position on iGO Navigation ....

Did anyone suffer when trying to Navteq.2020.Q2 maps and licenses (with well-known Shell scripts) on Medianav Evolution 1.0.13.3 that after starting navigation, and adding the destination, the location is not displayed while driving (the position remains set to the map where the Update was made to the maps, and the car's ICON remains either RED - initially, with some licenses from the Russian forum, or BLUE, after I tried with the 3 standard licenses, from the French forum, but the the car still doesn't change as it goes ...).

For info and completion, the GPS signal is ok, I can see all the satellites in the program ....

The NNGNAVI.exe file had to be replaced and I replaced it with the unlocked / cracked version (initially, with the standard version of NNGNAVI.exe executable that came with the navigation, with any licenses I tried, I didn't pass the Agree button or it gave me an error message that the licenses are incompatible) .... MAP code in the navigation firmware is [WEU] - WESTERN EUROPE
The GPS positions me, but the navigation arrow (CAR) does not move when the car is moving .... Everything seems to work, but when the car starts to move, the position of the car remains static, it does not move .....

I have already deleted SAVE and I do not have ECO and 4x4 active, but no results.

I also added in the attached files the output of the commands "/ sbin / fw_printenv" and "/ sbin / misc_getprop" and I executed the shell script of DIAG_NAVI - maybe this could help to find the root cause ....
I also updated [fw_setenv hwvar 0x1200], I will test it later in the evening to see if it works or not .... (initially, again, the navigation had hwvar 0x1300)

[Login or Register to remove this advertisement]

PS I saw that in the log files, the date of the LINUX operating system was -2 hours as the date displayed in the HOME menu of the Medianav interface (top right) .... I don't know if it's normal or not .... (interface date Home Medianav is automatically synchronized with GPS)

Has anyone ever met something like this before? Would it be solved if I write the firmware version of 1.13.3 / update.lgu again, give it a virgin Make from MICOM, resume the configuration and reset licenses, NNGNAVI.exe, maps? (now it's the original firmware, it was never written). It's really annoying that we haven't found a solution so far, and there are still cases in South America and Russia, especially on new Navigations, not initially mounted on any car ....

Thank you all very much for your help.

isnoxcape Reviewed by isnoxcape on 10th December 2020. MediaNav MN3 Evolution 1.0.13.3.369_r60 - does not update the position of the car on the map, when in motion.. Hi, Medianav 3 -> I installed/retrofitted it on a Renault Megane 2, the Medianav car radio was Virgin/new, it had not before been put on any car, it was in [Connect diag tool] mode. I put all the parameters (map code, audio / acoustic drivers , gps, VIN code, date 01/01/01, etc.) through a CAN Multimedia interface, using DDT, and it worked well, except that the licenses and maps were not present, because the radio unit was as I said, unconfigured before ... I put the GPS function active from Rating: 5