I typed in all the CCT.DAT.inf files and got 4 keys and it always says the same "Check your mapping and / or your activation key on the NavTek site!
I typed in all the CCT.DAT.inf files and got 4 keys and it always says the same "Check your mapping and / or your activation key on the NavTek site!
I typed in generator all the CCT.DAT.inf files and got 4 keys and it always says the same "Check your mapping and / or your activation key on the NavTek site!
I took 4 possible codes and I always get a message "Check the version of the cartography and / or the activation key"
"To retrieve the software version of RT6:
-Long press on "set up"
-Select "Radio telephone diagnosis"
-Select "Device description"
To retrieve the map version:
-long press on "Traffic",
-enter the word "CARTOVER" and select "OK" (this is called entering a cheatcode),
-emitting a beep,
-go to the navigation / map management / cartography and update menu "
- enter the VIN code of the car in it (you can find it in the heel or in the front window on the driver's side) - Attention, it must be written in capital letters.
- select the CCT.DAT.inf file from the generator folder or from the map root.
- we click on generated and voila, we have the activation code that the car will ask for (in principle - if it doesn't ask you you took it out, the map update works 5 minutes faster). Write down the code somewhere in the car when you start the update
https://i.postimg.cc/8Cq6hL78/screenshot-46.png
For RT6 systems: /CCT.DAT.inf (use the ROOT directory file) and press the GENERATE button, enter the activation code that will appear.
Now we deal with maps and for that:
- We are preparing a stick, which is formatted by FAT32
- Copy the maps to the root of the stick - everything in the archive folder (attention, only the contents)
@
If you read first post, it will be clear for you, or here the guide again:
How to use licence generator
- Start generator.jar
- Enter your VIN number
- Next add your CCT.DAT.inf file from root files in your new map for your car (CCT.DAT.inf from the root is only for RT6 system. For SMEG systems find the appropriate SMEG folder, where is correct CCT.DAT.inf located.)
- Then click "Generate", and you have your personal "Activation code" (to enter on Navigation screen, when install your new maps)
IMPORTANT : The minimum software version required to use this product is 2.10
If you don't know what software version is curently installed, you can check on this way: Press and hold the SETUP button on the centre console -> Radio-telephone diagnosis -> UNIT description. Will show you the version in the format RNEG 2.0.x up to 2.86b, which is the latest RT6.
If software is lower than 2.10, you can find newer version here:
Big thanks PEOPLE, I'm kidding with this for 10 days ... the mistake was that I typed lowercase letters and numbers in the generator and it needs a BIG :) thanks, thanks, thanks :)
@ScorpioPirate
I donate the database from , I enjoy the one from May 2021
https://i.postimg.cc/vHs5Nngc/screenshot-66.png
Hi pll! Need some help....
Seams someone deleted the Portugal and Spain maps! Any solution?
Thanks in advancehttps://uploads.tapatalk-cdn.com/202...dac52989ca.jpg
Enviado do meu SM-G998B através do Tapatalk