Activity Stream
245,731 MEMBERS
1524 ONLINE
GPSurl On YouTube Subscribe to our Newsletter GPSurl On Twitter GPSurl On Facebook GPSurl On Google+
Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y

Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1.     
    #1

    Help Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y

    I pulled the navigation module (BE M013) out of the car. I connected the module with a usb cable to the computer to the program Becker Content Manager. The program has updated the firmware of the module. After inserting the module into the car, navigation starts and hangs on the Becker logo. The module is visible on the computer as a disk, it can write and read files. The module reset button does not help. The module's battery is slightly swollen.

    Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y

    [Login or Register to remove this advertisement]

    Please help me on how to start the navigation.

    Thanks in advance.
    cebulowy-janusz Reviewed by cebulowy-janusz on . Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y I pulled the navigation module (BE M013) out of the car. I connected the module with a usb cable to the computer to the program Becker Content Manager. The program has updated the firmware of the module. After inserting the module into the car, navigation starts and hangs on the Becker logo. The module is visible on the computer as a disk, it can write and read files. The module reset button does not help. The module's battery is slightly swollen. Please help me on how to start the navigation. Rating: 5
    Last edited by cebulowy-janusz; 23rd July 2021 at 01:36 AM.

  2.   Advertisements

    Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y
  3.     
    #2
    With the new firmware you 've got a new 4th copy protection on your BMP now.
    Probably your map files were not bought in the Becker shop.
    You need to run a new mortscript to kill the new protection. Following link is only 5 days valid:
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.


    Description protections:
    Schreibschutz Becker Map Pilot (Ohne Gewähr)


    Da die Downloads von verschiedenen Usern angeboten werden, ist die Behandlung des Schreibschutzes verschieden:


    Variante 1: Im Hauptverzeichnis des BMP ist nur AutoRun.exe, device.sig, device.xml, DeviceInfo, die device.xmlt fehlt. Dies ist der Auslieferungszustand von Becker, die device.xmlt wird beim ersten Start des BMP dann angelegt, wenn Gerätenummer und Nummer in Kartenlizenz identisch sind. Dies funktioniert nur mit dem BMP, für den die Karten gekauft wurden.


    Variante 2: Der Anbieter hat die device.xml auf device.xmlt kopiert und beide Dateien mit Schreibschutz versehen. Dies funtioniert aber nur mit einer "alten" Firmware. Eine "neue" Firmware ignoriert den Schreibschutz, die eigene Gerätenummer wird in die device.xml geschrieben und mit der lizenz verglichen. Ergebnis: Programmabbruch, keine gültige Kartenlizenz. Hier hilft nur ein Firmware Downgrade.


    Variante 3: der Anbieter hat die Prozedur von User leiti in seinen Download eingebaut, hat aber nicht den Ordner 0 gefüllt, sodass die prozedur Autorun.mcsr nicht funktioniert. Die erforderlichen Dateien sind vom User selbst zu erstellen.


    Variante 4: der Anbieter hat die Prozedur von User leiti in seinen Download eingebaut, die device.xml auf device.xmlt kopiert und dann die 3 device.* Dateien in den Ordner 0 kopiert, dann dort den Schreibschutz gesetzt. Das ist in Ordnung, nur wird bei einer neuen Becker Release die Sache nicht funtionieren, da dann eine andere Gerätenummer verwendet wird.


    Da den meisten Usern Mortscript nicht geläufig sein dürfte, wurde die AutuRun.mscr so geändert, dass, gleichgültig welche Variante vorliegt, die Dateien korrekt aufgebaut werden. Der Trick besteht darin, bei jedem Start aus dem Ordner 0 die 3 device Dateien wieder ins Hauptverzeichnis des BMP zu bringen und damit läuft die Kiste.


    Installationsanweisung


    Starten Windows Explorer: Wenn der Suffix (Dateierweiterung, .xml, .xmlt etc.) nicht sichtbar ist: Oben rechts Ansicht klicken, rechts Optionen anklicken, Ordner und Suchoptionen ändern auswählen. Registerkarte Ansicht anklicken, Häkchen raus bei Erweiterungen bei bekannten Dateitypen ausblenden (8. Zeile von oben)


    BMP löschen, Version Vxx auf den BMP kopieren.
    Im Hauptverzeichnis des BMP AutoRun.exe in AutoRun.old umbennen (ggf. Schreibschutz aufheben).
    Alle Dateien und Ordner 0 aus diesem Schreibschutz-Download in das Hauptverzeichnis des BMP kopieren.
    BMP aufwerfen, in MB einbauen, warten.
    Last edited by 4Wheel; 27th July 2021 at 03:55 PM.

  4. The Following 1 Users Say Thank You to 4Wheel For This Useful Post:
    [ Click To Expand ]

    cebulowy-janusz (28th July 2021)

  5.     
    #3
    good evening, I have the becker m013 and suddenly without having done any refresh on the maps or something else you hang on the becker logo and it does not open, I did a reset but nothing, when I connect the device to the computer I see the files, can you help me?

  6.     
    #4
    @theodore
    The Content Manager has probably, without informing you, installed a new firmware on your module when the BMP was connected to the pc.
    If so: continue reading in my post#2 above and you will understand what happened and what you 've got to do to get it working again. Did you buy the maps from Becker?

  7.     
    #5
    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.


    I understend.
    I made a full backup of the working software that I bought with the car and uploaded it to the Becker_Map_Pilot_v.21_2021 module from the net. Restoring from a backup has no effect.
    How to downgrade the firmware ?
    Is there firmware in the APD / Software / directory in the files GlobalEuropeResources.apd and NAVCORE.APD?

    Thank you very much for your help and for the knowledge you gave me.

  8.     
    #6
    In most cases there is no possibility to downgrade firmware in general.
    Have you made visible in your explorer all files, so also the hidden files like system files?
    If the full back up also include the hidden files from maps supplied by Becker it should work when you restore that backup.
    However the same is valid for deleting all files: also hidden files like system files should be removed before you restore.
    Don't worry. If you download and install the fix in the link in post #2 you will get it back working.

  9.     
    #7
    Thanks for your prompt reply, I bought their maps along with the purchase of the car from the dealer so they are definitely genuine BECKER, this happens after a service performed at the workshop and logically connected the computer to the car.
    I connected the device to my computer and it does not copy the files to my computer folder.
    can you tell me what i can do, and how i will find the # 2 you tell me?

  10.     
    #8
    Bonjour

    a tu resolu ton probleme de becker ?

  11.     
    #9
    Hallo 4Wheel ich habe leider das selbe Problem
    BMP M013 updated auf V21 oder besser versucht. Dateien sind mir zugeflogen.... Ahnung habe ich wenig bis keine. Nach einer Anleitung mit xmlt Datei selber erzeugen gemacht seit dem egal ob die neue Version drauf ist oder die alte zurück gespielt geht nur noch der rote Becker Schriftzug an, ab und zu kommt Modul wird aktiviert aber danach kommt wieder der rote Becker Schriftzug.
    Ich sehe Du schreibst deutsch und hoffe echt Du kannst mir helfen.
    Besten Dank im Voraus
    Paul

  12.     
    #10
    Salut Paulemeier1 voici la version pour ton modèle M013 versions v22.1 (année 2022-2023). une fois télécharger et décompresser, formate ta partition Becker MP en fat32, ensuite sur le fichier télécharger sélectionne le fichier devices.sig, devices.xmlt, device.xml (xml et xmlt doivent être en lecture seul) copie c'est 3 fichiers sur la partition Becker MP, une fois terminer fait éjecte du périphérique et débranche ton Becker.
    Ensuite le reste des fichiers, (autorun, mapregionspsf50, Navi, manuel, APD) copie c'est fichier sur une carte SD minimum 8GO. une fois terminer met la carte SD dans le Becker et installe dans le véhicule et le tour est joué.......

    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

Page 1 of 2 12 LastLast

  Suggested Articles:

Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y

Tags for this Thread

Amount:

Enter a message for the receiver:
BE SOCIAL
Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y GPSurl On Facebook Becker Map Pilot hangs on Becker logo - Mercedes W204 2012 y