Activity Stream
245,706 MEMBERS
1490 ONLINE
GPSurl On YouTube Subscribe to our Newsletter GPSurl On Twitter GPSurl On Facebook GPSurl On Google+
Universal Firmware Patcher for Protected Garmin Devices

Page 6 of 197 FirstFirst ... 456781656106 ... LastLast
Results 51 to 60 of 1967
  1.     
    #51
    DXOS3's Avatar
    Here's some other useful tips that might lend a hand to those having trouble.
    -Before doing ANY of the above steps, make sure to install Garmin USB drivers on your computer which can be found
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.
    -->Garmin Corp
    -To get preboot mode in the newer Garmin Drive Series devices, hold your finger right between the 'G' and 'A' logo instead of the top left hand corner of the screen.

    -If RGN tool fails, you might have to use the command line tool, gfw.exe which can be downloaded
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

    -You will have to navigate to the folder with your gupdate file and type gfw unpack gupdate.gcd (C:/Users/lkajdfhl/Downloads/Garmin35 gfw unpack gupdate.gcd) to get the region/subfiles.
    -Next go up one folder and then type gfw bldfldr which will pack the subfiles into a new RGN file. You might need to rename the file using the naming conventions below
    More information about this tool can be found here (including source code):
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

    Author: kunix (gpspower.net)

    IMPORTANT: All RGN files must be named a certain way before Updater will confirm a flash on your device: XXXX00010XXX.rgn
    XXXX-HWID

    Universal Firmware Patcher for Protected Garmin Devices

    [Login or Register to remove this advertisement]


    00010-Put er' there!
    XXX-Software version minus the decimal point.

    -Once the initial flash has been completed, you may proceed to do device map updates on Garmin Express and firmware updates via Webupdater which can be found in step 2.
    -Best results for having many maps might require at least an 8GB microSD card but the more the better (32GB is optimal)

  2. The Following 6 Users Say Thank You to DXOS3 For This Useful Post:
    [ Click To Expand ]

    BYEDUS (10th August 2018), Kuhtreiber (18th February 2020), maucenaiks (25th February 2020), mightyoutlaw (12th November 2019), R@me$h (9th August 2018), tomojure (17th November 2018)

  3.     
    #52
    Aquí hay muchos firmware ...
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

    Here are many firmware ...
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

  4. The Following 2 Users Say Thank You to BYEDUS For This Useful Post:
    [ Click To Expand ]

    DXOS3 (10th August 2018), tomojure (17th November 2018)

  5.     
    #53
    Worked perfectly on a Drive 51. Thanks!

  6.     
    #54
    DXOS3's Avatar
    The above IMG patcher appears to work just fine, seems to also support the newer Drive series devices. I will offer an alternative however:
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.
    IMGPatcher130 15-06-18---> big-bang (gpspower.net)

  7.     
    #55
    B1ng0's Avatar
    @DXOS3
    Yes, the file in the OP works fine but only for those devices which can use the JNX files just as I said. The correct file for UNIVERSAL PATCHING is indeed what you've now posted above. Kindly also give credits because you aren't the author of either of the patchers. The Universal patcher already has a thread in this forum anyway,
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.
    . Moderators might consider merging because this is simply an update of IMGPatcher v1.20 anyway. The author is big-bang from g p s p o w e r regardless.

  8. The Following 1 Users Say Thank You to B1ng0 For This Useful Post:
    [ Click To Expand ]

    PIRINEU1956 (20th December 2019)

  9.   Advertisements

    Universal Firmware Patcher for Protected Garmin Devices
  10.     
    #56
    Where the 4 files come from .BIN and .TXT. of the patch. GARMIN .RAR?
    The final file is not a .RNG

    De donde salen los 4 archivos .BIN y el .TXT. del parche. GARMIN .RAR?
    El archivo final no es un .RNG

  11.     
    #57
    B1ng0's Avatar
    @BYEDUS
    Are you referring to an SD Flash for patching? If so, the BIN files are the individual components of an RGN file which can be seen in RGN_Tool. This is an easy alternate method for flashing devices with the firmware protection known as 'GVS' (Garmin/gupdate Verification Signature) which would otherwise reguire inital loading of patched fw using Updater.exe to flash an RGN in preboot mode. Once an official GCD file has been altered by the patching process, the devices with GVS protection will not allow direct flashing of that file because it does not pass the GVS check. That checking process is overcome and removed when the initial flashing is done by a patched RGN or BIN files.

    The TXT file contains the commands to flash the BINS to the device's relevant regions (rgn14 [0x0E], rgn127 [0x7F] & rgn158 [0x9E]). Those commands are initiated by LDR.BIN which is simply the BOOT.BIN renamed.

  12.     
    #58
    B1ng0's Avatar
    The potential for confusion is less now that you've edited the initial post, that's provided readers now fully understand that Alex's JNX patcher is only for using JNX files freely on the handheld outdoor devices as shown in the link. It doesn't allow any modern protected auto or outdoor device to use unlocked detail maps, that's what big-bang's Universal patcher is for. Nevertheless, I do understand that your intention is good and it was simply an honest mistake as to the purpose of the two different pieces of software. Thanks for making the acknowledgements to the two authors too.

  13. The Following 2 Users Say Thank You to B1ng0 For This Useful Post:
    [ Click To Expand ]

    Akyta (13th August 2018), biggerdave (13th August 2018)

  14.     
    #59
    B1ng0's Avatar
    Quote:
    Only the registered members can see the QUOTE Contents. Please Login OR Register.

    There is no direct link for firmware posted above. You can find the latest for most Garmin devices here:
    Code:
    Only the registered members can see the CODE Contents. Please Login OR Register.

    Your nuvi 65:
    Code:
    Only the registered members can see the CODE Contents. Please Login OR Register.

  15.     
    #60
    Link URL:
    Only the registered members can see the Link URLs. Please Login OR Register.

Page 6 of 197 FirstFirst ... 456781656106 ... LastLast

  Suggested Articles:

Universal Firmware Patcher for Protected Garmin Devices
Amount:

Enter a message for the receiver:
BE SOCIAL
Universal Firmware Patcher for Protected Garmin Devices Universal Firmware Patcher for Protected Garmin Devices Universal Firmware Patcher for Protected Garmin Devices GPSurl On Facebook Universal Firmware Patcher for Protected Garmin Devices