<Model><PartNumber>006-B1859-00</PartNumber><SoftwareVersion>560</SoftwareVersion><Description>GPSMAP 64s
could you please send me the patched FW?
thanks for answering!
Printable View
<Model><PartNumber>006-B1859-00</PartNumber><SoftwareVersion>560</SoftwareVersion><Description>GPSMAP 64s
could you please send me the patched FW?
thanks for answering!
Many many thanks FireFox58 and Garmin Nuvi !!!
I did the update as explained and it worked great!
Installed the city map 2020 south with succes.
Immediately did the same on a 2nd device of a friend, also worked out fine!
Now, please indicate me the setup of city navigator europe 2020 so I can use it to navigate with my Motocycle!
Thanks in advance for your support!
Hi,
First time posting to the forum :grin:
Device details below:
-<Model>
<PartNumber>006-B1187-00</PartNumber>
<SoftwareVersion>370</SoftwareVersion>
<Description>nüvi 2360</Description>
Thanks
Welcome to the forum and thank you for reading up before posting,fortunately your device dose NOT require Patching to use unlocked maps
Your next steps to check out
nuvi 23xx (GCD File) 006-B1187-00 Release 3.70
Hello ,
this is my garmin model:
<Model>
<PartNumber>006-B2237-00</PartNumber>
<SoftwareVersion>410</SoftwareVersion>
<Description>Camper 660</Description>
Can i get the patch for this device so i can use unlocked maps on it.
Thank you.
Camper/RV 660 006-B2237-00 Release 4.10
RV/Camper 660 SD card Patch kit FW 4.10 HWID 2237 ONLY
Instructions
Hi:
I am new to this forum and this post interests me a lot.
I have an Etrex 32x. I have already used firmware patched on my prior etrex 20 to load JNX maps.
I would like you to confirm that in order to load city navigator maps on my etrex 32x I have to use the firmware of this post:
Firmware updates are done by GE or manually by Webupdater (not Pre Boot mode)
eTrex20x_30x_Webupdater__300.gcd
eTrex22x_32x_Webupdater__250.gcd
and I guess the procedure to install it is this:
Download and unpack, eTrex22x_32x_Webupdater__250.gcd to your PC where your device is attached.
Then you drag-and-drop eTrex22x_32x_Webupdater__250.gcd onto the WebUpdater icon on your desktop.
The Firmware will be flashed on Device
I say this because the post states that I can unlock an .img using gimgunlock-0.04 (without patching your firmware) and I don't understand if eTrex22x_32x_Webupdater__250.gcd is the original firmware that is already installed in the GPS or is a patched firmware .
Finally, I would like to know if this firmware already includes the possibility of loading JNX maps or I have to perform a subsequent installation of:
eTrex22x_32x_Webupdater_250_JNX_rar
Of course, the maps have to be unlocked with gimgunlock-0.04 and the NTUs modifying CP65001.