Use the latest Patched version by FireFox58
Original
Zumo 3x5 006-B2435-00 Release 4.60
(28156 Kb)
Printable View
Use the latest Patched version by FireFox58
Original
Zumo 3x5 006-B2435-00 Release 4.60
(28156 Kb)
Is there someone can help me to patch my Driversmart 51?
<PartNumber>006-B2803-00</PartNumber>
<SoftwareVersion>370</SoftwareVersion>
<Description>Garmin DriveSmart 51</Description>
Thanks a lot.
This is a custom SD flash kit only for HWID 2803 devices (Drive & Drivesmart 51 APAC), firmware version 3.70
Changes made from version 3.40 to 3.70:
- Improved software stability.
- Improved GPS reception.
Instructions: see
Drive and DriveSmart 51 APAC (2803) fw3.70.rar
Mirror
Drive and DriveSmart 51 APAC (2803) fw3.70.rar
I'm using a Garmin Edge 820 for biking. I Always patched my firmare with IMGPatcher v. 1.30 for using my Garmin Topo_DE V8 map.
This still works fine.
But, now I bought a Garmin Edge Explore HWID 3011 for my wife and I also wanted to use the topo map on that device.
So I tried the same on the Edge Explore I did on the Edge 820. IMGPatcher is not working with the Edge explore Firmware, so I took the JNX Loader Patcher 3.80 and used the 4.10 Firmware from Garmin with the patcher. Renamed it to GUPDATE.GCD and put it on the device.
System was updated fine but I still can't use the Garmin topo map. It is not shown in the Maps list.
What am I doing wrong? Or what do I have to do different on the Edge explore, to get that map working?
Thanks for help!
Last version of IMGPatcher is 2.20 of Oct 15 2019 (see Attachment)
Altough EdgeExplore firmware (HWID: 3011) seems to be recognized by the Patcher it doesn't work
The issue has been reporter to developer ...
Meanwhile you can try to overcome problem by changing Code Page of Map. from NTU 65001 to NT 1252 (use ImgTool v1.10.2)
If you don't know how to proceed I will prepare a little guide
:lol:
Thanks for helping me man :gc:
I changed the Maps Code page and that worked fine. map is now accessible on the device !
Tried the imgpatcher and it works with fw 4.40. Not working with 4.60 or 5.00 !
hello
I search a patch for
-- description : DriveTrack 71
-- part numer : B2588
-- software :630
I've seen the patch for drivesmart / 2588 / 620 but not for the 630 software
think's by advance
DriveSmart 61, DriveTrack 71 006-B2588-00 Release 6.30
(41928 Kb)
DriveSmart 61/DriveTrack 71 fw 6.30.rar SD card Kit FWID 2588 ONLY
Make sure your device is fully charged.
Unpack contents to fresh SD card formatted FAT32
Ensure your device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for a while then the device will boot up when the flash of patched firmware is complete.
Your device may reboot its self during the process just be patient.
Your SD card will have a new file named 154.bin this is a backup of the device's non-volatile memory region and may save your device later if needed, so keep a copy of it somewhere safe.
As kindly request from (I was able to Patch Device)
This is a Patched Firmware (JNX + Unlocked Maps) for Garmin Edge Explore ver. 4.60
Since the Garmin Edge Explore (HWID: 3011) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Changes made from version 4.40 to 4.60:
- Remove decimal button in Guest mode password keyboard.
- Fix issues that incorrect rider position on elevation page.
- Fix issues that sharp bend warnings stuck on the screen when coming out from battery save mode.
- Add several stability improvements.
Give feedback!