Firmware of Edge 830 is encrypted, so the Patcher doesn't work on it
Printable View
Firmware of Edge 830 is encrypted, so the Patcher doesn't work on it
FireFox58 Many Thanks for the SD flash kit.
Learning experience for everybody, the newer HWID 2590 does not recognize anything less than a 8Gb SD card in the bottom slot. Spent many hours formatting and loading 2Gb and 4Gb SD cards, and the device would not recognize them, and the loader would not start in either slot.
Trick I learnt the hard way after many, many, hours, put a new 8gb card in the camera slot, and start the device, and it will format the SD card and create a file called ID.txt on the card.
Copy the custom SD flash kit for the correct HWID to the camera SD card.
Remove the Camera SD card and Insert into the bottom expansion slot, then shutdown and restart the device, and the loader will boot and do the patch.
Goodluck
RichJo
Maybe the problem is Code Page of Maps.
Check Code Page of the working Maps, it should be 1252
Check Code Page of the NOT working Maps, it should be 65001
If the situation is as above you can modify Code Page of Maps in 1252 (NT)
:lol:
Floydo is right. I downloaded the SCBD .csv file and created a custom POI file using POILoader.
Hello, not sure if I should write here, but i have a ZUMO 345lm with western europe and I need eastern europe or full europe.So no matter what i try in my SD card i aways get "maps are corrupt and cannot be used" (i try with unlocked maps 2020.10, with locked and unlocking them - no luck).
So I came to this thread, do I need to patch it?
<PartNumber>006-B2435-00</PartNumber>
<SoftwareVersion>460</SoftwareVersion>
<Description>zumo 345</Description>
Hi to all !
Can someone please help me with a custom SD flash kit for a ZUMO 590 LM, HWID 1796, SW 3.30 ?
Many thanks!