SD card kit Drive 5S and ,Drive,DriveSmart 51 (2586) fw6.00 ONLY
Printable View
Hi Garmin_Nuvi.
Thanks a lot. Everything went great.
Only, I did not manage to install Europe 2019.30 maps witch is in two folders, north and south. I do not know why. Still I managed to install Europe 2019.10, which are in one file. That's enough for me now.
Thanks again
Hi
I have garmin smart 51 and as i hold the screen at the side of the letter (G) to open it...
It doesnt open with me
I have other devices and the same operation of holding the side g with my finger opens perfectly fine
What should i do with the garmin smart 51 to open the patch system?
Firstly in your garmindevice.xml in the Garmin folder if you open with Internet explorer does it look like this <PartNumber>006-B2586-00</PartNumber> 2586 ?
Make sure your device is fully charged
Are you using "updater" with the .rgn you have created ?.
You obviously made your back up ?
Pre-Boot Drive, DriveAssist, DriveSmart positions:
1. Turn off the Navigator fully not just standby
2. Turn on the Navigator, it is preferable to switch it on by inserting the USB into the PC
3. As soon as the Garmin Logo appears, press and hold in the Display area immediately above and between the letters "G" and "A".
If you download the SD card kit
The kit is very simple to use no need to use Pre boot.
Download the RAR file from the previous post then extract directly to a clean microSD formatted in FAT32 (Use WinRar to extract).
Ensure the device is fully OFF (not in standby), insert the card in device and power on.
"Loader" will appear on screen for some time and the device will boot up when the flash of patched firmware is complete.
The device will reboot itself during the process.
After the Patch is applied the device will be able to read Unlocked Maps
Hi guys,
I'm trying to patch a Garmin Drive 50.
I've downloaded IMGPatcher V1.30. When running the tool it says:
I'm a bit worried about the " 5.70 for Unknown device (HWID 0)." part (Specially since the HWID is 0) even though reading the GarminDevice.xml file I know that the HWID is 2267 (Part Number 006-B2267-00).
When opening the GCD file patched with IMGPatcher with the RGN Tool it says HWID 0 or N/A in every text box. (Screenshot: )
If i open the original GCD fille with RGN Tool the HWID is still 0 or N/A
It's safe to update the GPS this way or should I use a different tool or event override HWID in RGN Tool with the correct one?
Do not worry about reported HWID as "0" or "N/A", and do not try to override it - no need for that.
GCD is patched properly, it is safe to update your device in this way.
Hello, please help me)
I need custom SD flash or instruction for Garmin Drive 61.
<PartNumber>006-B2587-00</PartNumber><SoftwareVersion>600</SoftwareVersion><Description>Garmin Drive 61</Description>
Thanks
Sorry, wrong information. My bad. Thanks Genius3.