hi Firefox, I had a very old unit of nuvi3790 but I think I brick it when I flash it with the latest firmware (it was modded to 34xx using US firmware years back. If there a way I can try to unbrick this unit?
Printable View
hi Firefox, just to check is it possible to patch GPSMAP 66sr latest firmware?
As kindly request from
This is a Patched Firmware (JNX + Unlocked Maps) for eTrexTouch 25/35 (HWID = 2140) ver. 4.40
Since the eTrexTouch 25/35 (HWID: 2140) does not have the GSV and falls into category 2
MSV: Yes, GSV: ---
In this case the Patched Firmware guarantees the correct reading of Unlocked Maps, including NTU and TOPO Maps with CP 65001.
The Patched Firmware guarantees reading of BirdEyes JNX images too.
Be sure to remove All BirdEyes images eventually present on Device before apply Patch
BirdEyes images can be restored AFTER flashing new firmware
Also, in this case the "patched" Firmware can be loaded through the normal update procedure via WebUpdater
Changes made from version 4.00 to 4.40:
- Fixed possible display issue with the geocache filtering page
- Fixed navigation issue when clearing the current activity
- Fixed possible issue when navigating to a geocache
Give feedback!
Hello.
is there a solution for a garmin 785 dēzlCam 785?
Thank you
<Model>
<PartNumber>006-B2911-00</PartNumber>
<SoftwareVersion>550</SoftwareVersion>
<Description>dezlCam</Description>
</Model>
Garmin dezl 785 uses android as its operating system. so you can install any android application like on a tablet.
Dont work fine....I have got a garmin ETREX touch 35, can you help me to put a maps?
If it can be from Spain and surroundings, it would be appreciated, and tell me how to install it .... I have tried to put one downloaded from this forum, a topo, and it tells me when I start the gps that the maps cannot be authenticated ...
I updated with garmin express and it has given me some maps, but when looking for an address I cannot find Spain ...
Any ideas?
Sorry for the mistake, I was wrong ...
Download again attached file, now is right
:lol:
Your device will have to be patched to use unlocked maps
These devices came with in two parts, make sure both are selected
D6185090A(TopoActive 2020.20, South West)
gmapprom(TopoActive 2020.20, North East)
Hi guys, I'm looking for a way to install JNX maps in my GPSMAP64s.
I've tried with JNX loader patcher (ver3.8) (firmwarepatcher) but when I select the patched .cgd file it does't work ("Pattern not found" error).
My garmin:
<PartNumber>006-B1859-00
<SoftwareVersion>560
<Description>GPSMAP 64s
Can you please help me?
Thank you very much!
Moderator Notice :